left handed nut
earl jordan
I have a super 900 and have striped the left handed nut that holes the blade can anyone tell me how to get another one or if anyone has one I will by it. thanks earl jordan
Knowledge You Can Build On — Est. 1998
left handed nut
earl jordan
I have a super 900 and have striped the left handed nut that holes the blade can anyone tell me how to get another one or if anyone has one I will by it. thanks earl jordan
Re: left handed nut
Howard Norman
I am not sure of the nut size that you need but my local Ace Hardware has a selection of left hand nuts. Can't say how widespread the practice is of carrying left hand nuts at Ace.
Re: left handed nut
Don Orr
Fastenal has a wide variety of nuts.
Re: left handed nut
Barry Irby
MacMaster-Carr might have it.
You need to know the diameter or the shaft and the type and pitch of the threads.
Re: left handed nut
walta
I think he is looking for the arbor nut for a radial arm saw.
The nut is likely an acme thread that you will not find in my local hardware stores.
I would start in the “bring out your dead’ section of the Old Wood Working Machine web site. OWWM.ORG Please note you cannot see the BOYD until you get a member name and password. Please read all the rules before posting to OWWM as they are strict.
It may be the same nut as the left tilt unisaw.
Walta
My cousin, Harley