Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

In the News *LINK*

Posts

In the News *LINK*

#1

In the News *LINK*

Thomas Skaggs, Foothills of Mount Level

So I open Yahoo today and see that there is a news piece in which Bob Villa clues the world in to essential tools. In case any of you are clueless about the essential woodworking tools to have, please check this link. I offer this as a public service.....


Bob's 7 Essential Woodworking Tools

Re: In the News *LINK*

#2

a level?

Tom Sontag - St. Louis

I have never even once used a level for working with wood. It is a construction tool.

Bob's really scraping around for an audience, huh?

Re: In the News *LINK*

#3

Attention to details

Keith Newton

Bob is the man isn't he? He he, I wonder how many block planes get sold, that are never as sharp as the edge which came on them.

I guess I need to get a metric try-square.

I liked the looks of that kitchen on the last page, but had to wonder how well that faucet on the island works out with the tiny sink/drain on the solid end-grain wood top.

Re: In the News *LINK*

#4

Re: a level?

Thomas Skaggs, Foothills of Mount Level

I don't have a saw like that. But I am hoping to do some woodworking this weekend. So I guess I'll have to go to Lowes. I goofed and bought a bunch of other saws over the years.

Re: In the News *LINK*

#5

Re: In the News

Robert Fuller

Titled "Bob's 7 Essential Tools", yet there are 8 shown.

Maybe one of his essential tools should be the ability to count.

Re: In the News *LINK*

#6

New Math?..... Hmmmm

Tim Greif - West of Chicago

Let's see - block plane, tape, level, square, bevel gauge, hammer, chisel and saw. There's eight items that constitute Bob's seven essential tools. I really hate this new math they're teaching nowdays. Confuses the bejesus out of me. But then, I'm just an old fart stuck in the past. Now where'd I put my slide rule?

Re: In the News *LINK*

#8

Common Core

Thomas Skaggs, Foothills of Mount Level

If Bob can explain how he got to his answer, he still gets credit. ;-)

Re: In the News *LINK*

#9

I've found a few uses...

John in NM

But not for a builder's level, they aren't accurate enough to be useful outside the building trades. I do use a couple of those when installing cabinets and doors, stuff like that.

I have a couple machinist's levels that have straight tubes and are much more accurate. Those are handy for quick and dirty checks of my drill press table - I often swing it to 90 for some operations and don't always set up a dial mic to set it back. Also use them for checking that the chucks on my copy carver are roughly synced.

Re: In the News *LINK*

#10

Context

Bill Houghton, Sebastopol, CA

The intro talks about "always something to fix at home," and then focuses on the woodworking tools required. So, in context, a level makes sense, because a lot of home repairs are, in fact, construction. And construction does include woodworking, just not the type of woodworking on which we focus here.

I don't know whether Bob Vila does all of his hole-drilling and screwdriving with a hammer, or if he considers drills and screwdrivers non-woodworking (or in the larger category of multipurpose tools). I was startled by the bevel gauge - for home repairs? Lots of things come first. And he says a combination square is the best type of "try square," thus making a specific term into a generic one; irritating.

Lots of innocent young people will wind up getting a "set" of tools that leaves them frustrated.

Aside from his apparent inability to count - he also cheats by listing saws and chisels as one tool each, yet lists more than that in the details - these kinds of artificially limited lists are always silly. I've got the homeowner's guide to home maintenance that Dad's mom (that is, my Granny) gave him for Christmas the year they bought their first home, and back then, in the postwar years when people didn't have much money, the list is a lot longer than seven. Or eight. Or fifteen, which is the count when you add up all the tools that he actually lists (at least one of which, a hacksaw, is not usually a woodworking tool, although I've used mine to cut wood).

But, hey. He's now given us an opening to educate the innocent young people in our circle of acquaintances as to the right and proper list. Whatever that is (I suspect each of us would have a slightly different list, based on our preferences).

Re: In the News *LINK*

#11

Re: In the News

BrianMonumentCO

It looks to me like bv is trolling for response to see if anyone wants him to make a comeback.

I will not answer whether I want him back.

How does 8 = 7?

Re: In the News *LINK*

#12

Re: In the News

John McGaw

I was helping some friends who ran a busy REO agency a few years back. They needed to make access to a large rural property and the long winding drive was blocked by a few trees that had come down in a storm. I took the chainsaw and cleared the road and when I got to the house I discovered that it is possible for a do-it-yourselfer to build a house without recourse to either a square or a level. You should not be able, from 50 yards away, to see that windows are unlevel and and mounted into randomly proportioned (but never rectangular) openings. I figure that it must have sold but, when it did, it surely must have been for the 10+ hillside acres and killer views.

Re: In the News *LINK*

#13

Missed some

Jerry Nicholson

He left out duct tape and WD40, for those times when things that shouldn't move do and other things that should move don't. He didn't mention that there should be screwdrivers in every room of the house, including the bathroom and that one tape measure is never enough.

About 25 years ago, a lady I worked with and her husband found that they had some termite damage in their oak flooring. The repair cost was too high for them so they decided to replace the flooring themselves. Neither had any aptitude whatsoever for mechanical things but they tackled the job and actually got it done. Their first hurdle was when they discovered that they would need hammers and, although they were in their early 60s, had never owned a hammer. At that time I had never heard of a house without a hammer! Or two or three or five or????

Jerry

Re: In the News *LINK*

#14

Re: In the News

Howard Norman

I would disagree with the title of the article but editors white titles not authors in my experience. For a new home owner or renter I wouldn't disagree with the list much. However a bevel finder would not be on my primitive list.

Re: In the News *LINK*

#15

Re: a level?

Jesse Cloud

If you're looking for tools to use around the house, I think a level is a good one.

One of my wife's favorite things is moving all the pictures in the house and rehanging them. We never agree whether is picture is hung level, so the tool saves a lot of discussion. ;)

Re: In the News *LINK*

#16

Re: New Math?..... Hmmmm

Jesse Cloud

I never did learn how to add with a slide rule. ;)

Re: In the News *LINK*

#18

College Tool Kit

Bill Tindall, E.Tn.

When kids went to college they were given a large ammo box equipped with handy multitasking tools- hammer, pliers, screwdrivers, adjustable wrenches, can of oil, duct tape, etc. This gift has also been made as a graduation present to other kids headed off away from home. I have received favorable feedback. In particular the girl with a tool kit soon becomes well known and appreciated in the dorm.

Re: In the News *LINK*

#19

Also...

John in NM

Vise Grips! :D

Re: In the News *LINK*

#20

Re: Context

William Duffield

What would you need a whole hacksaw for? I just replace my turning saw blade with a hacksaw blade when I need to cut some metal.

Re: In the News *LINK*

#21

One of My Favs   


Re: In the News *LINK*

#22

Re: a level?

Tom

Well you are a better man than I. If my wife did that, I would get some epoxy. Mine is pretty easygoing, which may be a trap. I took some pictures down to repaint 15 years ago, and I just repainted, and I haven't put them back up yet from the first time.

Re: In the News *LINK*

#23

Re: College Tool Kit

Tom

An ammo box, that explains some of the news.

Re: In the News *LINK*

#24

Re: How does 8 = 7 ?

Yonak

• Step 1 : Let a = b

• Step 2 : Then a² = b²

• Step 3 : a² + a² = a² + ab

• Step 4 : 2a² = a² + ab

• Step 5 : 2a² - 2ab = a² + ab - 2ab

• Step 6 : 2a² - 2ab = a² - ab

• Step 7 : and 2a² - 2ab + 6 = a² - ab + 6

• Step 8 : This can be written as 2(a² - 2ab) + 6 = 1(a² - 2ab) + 6

• Step 9 : and cancelling the (a² - 2ab) from both sides gives 2 + 6 = 1 + 6

• Step 10 : therefore 8 = 7

simple ..

Who says new math is hard to understand ?

Re: In the News *LINK*

#25

Whoops...

John in NM

The error is in step 8 :D