Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT Sealer for Slate

Posts

OT Sealer for Slate

#1

OT Sealer for Slate

William Duffield

I have been working on a new chimney and fireplace. It is replacing the original fireplace that was removed around 1900. The latest step was to install a black slate facing around the fireplace. What would you recommend as a sealer for the slate? I am considering a clear, dewaxed shellac.

The slate is from Buckingham Slate and is basically floor tile, with a honed surface.

http://bvslate.com

http://en.wikipedia.org/wiki/Buckingham_Slate


Sorry about the disorder in the room and the dust on the camera lens. This project will get back on topic later as I start building a wooden surround, chimney cabinets, mantle and trim and mouldings.

Re: OT Sealer for Slate

#2

Re: OT Sealer for Slate *LINK*

Dustmaker Mike

Will the surround need to be heat resistant? If not I would just get a good flooring sealer and us it before you grout it. Take it from someone that grouted a marble floor before sealing it. It takes a lot of work to clean it.


http://www.tilecleaning.org/sealing-slate-tile.htm

Re: OT Sealer for Slate

#3

Re: OT Sealer for Slate

William Duffield

Too late, Mike. It's already been grouted. But we did a decent job of getting the grout off of the surface of the slate, helped by it being a very close color. Hopefully the sealer will also darken the grout lines. We used a charcoal grey grout, but as it has dried is has lightened substantially.

Re: OT Sealer for Slate

#4

Re: OT Sealer for Slate

William Duffield

Too late, Mike. It's already been grouted. But we did a decent job of getting the grout off of the surface of the slate, helped by it being a very close color. Hopefully the sealer will also darken the grout lines. We used a charcoal grey grout, but as it has dried is has lightened substantially. The mason who built the chimney and fireplace for me has done a lot of grouted tile floors, but this is the first tiled fireplace face for either of us.

Yes, it does need to be heat resistant. The fireplace draws very well so there won't be any flames licking out the front, but we will be building a wood fire in it most days in the late fall, winter and early spring.

Re: OT Sealer for Slate

#5

From Experience

Mark Mandell - Gone Round In New Jersey

with marble and granite . .

Best stuff I've found for stone is Dupont Stonetech's "BulletProof" sealer.

Re: OT Sealer for Slate

#6

Why seal at all?

John in NM

It's neither a floor or counter top, not likely to get stained, especially since the fire place draws well. Might get a little smoke stained above, but I would expect that to bond pretty well to the sealer anyhow.

I might seal it for aesthetic reasons, like if I wanted a darker, "wet" look, but that would really be the only reason.

Re: OT Sealer for Slate

#7

Re: Why seal at all?

William Duffield

That's why I'm hoping I could get away with using shellac. Aesthetics are important, and greasy and sooty fingerprints.

Re: OT Sealer for Slate

#8

I was told....but then I used...

Grant in Iowa

I was told by a flooring guy that a good sealer for slate is mineral oil. I used it on a slate inlaid table once and it worked fine for me. Presumably, it needs reapplied more often than commercial sealers, but that may or may not be a deciding factor for you.

As I write this, I do wonder how flammable mineral oil is, given your location. Not sure, but I would wager not much more flammable than the commercial offerings.

I use a commercial product on ~150 square feet or so in our entry/ mud/ laundry room. It was Aqua mix "Enhance and Seal" from Lowe's. We used the same product on our fireplace mantel. It REALLY brings out the color in the varying slate in our case. I have lived there five years, have reapplied once, and it is about due again.

Here's a pic of the slate with the above sealer on our fireplace.


I look forward to following progress on the overall mantel. Looks nice so far.

Regards,

Grant in Iowa

Re: OT Sealer for Slate

#9

Re: OT Sealer for Slate

Barry Irby

Back when I started as a builder I used slate floors for foyers. I bought the slate from the quarries in Buckingham. (Worth a trip to see if you live not too far away) Mine was cleft face, not honed. They recommended a product Called Dress Slate or some variation of that spelling. That was thirty years ago of more, perhaps things have changed.

Re: OT Sealer for Slate

#10

That works...

John in NM

One thing to try would be have a big roaring fire so you can check how hot the slate gets. I would bet warm or hot to the touch, but not uncomfortably so. Shellac does melt at 150 I think, maybe a bit higher - used to know as it's used in faceting wax, but I've forgotten now.

Re: OT Sealer for Slate

#11

Re: OT Sealer for Slate

William Duffield

My son lives about a half hour drive from Buckingham Slate. We've been there. It's an interesting place.

It seems Dreslate hasn't been available for about 30 years, at least according to some floor forums. Thanks for the tip.

Re: OT Sealer for Slate

#12

Re: That works...

William Duffield

I have some spares, so I may as well do some experimenting. I can shellac one, set it up against the side of the fireplace and observe what happens. Of course you're right. Shellac melts at a rather uncomfortable temperature, but not so high that it can't be used for burn in sticks for furniture finish repair.

Re: OT Sealer for Slate

#13

Re: I was told....but then I used...

William Duffield

Nice colors on your A&C mantle. I'm afraid mine is going to be just black and white, as are almost all mantles on houses as old as mine (1727). If they ever were not painted, at some time, someone decided the limits of their imagination or decorating budget severely restricted their finish choices. So, the woodwork will be paint grade tulip poplar, but with more complicated mouldings, in a colonial or Federal style. I have a nice slab of walnut that I could use for the mantle board itself, but SWMBO will not hear of using it.

Re: OT Sealer for Slate

#14

Re: OT Sealer for Slate

Barry Irby

30 years would be about right, I have been a Home Inspector about that long.

I asked to see the quarry. The manage said sure. We walk about two hundred yards, Stepped between some really big logs and peered into the abyss. The hole was about 300 feet deep and had vertical sides. It was truly a Kodak moment.