Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Utility Grade Plywood Question

Posts

Utility Grade Plywood Question

#1

Utility Grade Plywood Question

Terry in Edmonton

I purchased 4 sheets of utility grade yellow birch plywood the other day to build some equipment cases for our work trucks. As they were going to be beat to s**t, utility grade was good enough. The supplier had 4 lifts of them and every one of them was warped, several near sand throughs, full of voids and thicknesses varying by up to 1/16". The funny thing was, the surface veneer was spectacular. Beautiful grain with some spalting. I knew what I was buying was poor quality but the price was very good and I could live with it.

My question is, how can the manufacturer get so many things wrong on so many sheets of plywood. The veneer matched well on all the sheets in one lift so I know they weren't the odd bad sheet pulled off the line.

The cases are built and they look spectacular. Everyone was impressed so I didn't tell them about the quality of the materials.

Re: Utility Grade Plywood Question

#2

Re: Utility Grade Plywood Question

Dick Coers

Were they domestic or imported? I guess as long as they sell them at a price the customer will pay, and go ahead and use them, what do they have to loose?

Re: Utility Grade Plywood Question

#3

Re: Utility Grade Plywood Question

Barry Irby

Probably made in China with American wood faces. No telling what the internal plys are or what moisture content was or anything else.

Are these in the weather? Can't imagine this stuff is water proof.

Re: Utility Grade Plywood Question

#4

Re: Utility Grade Plywood Question

Terry in Edmonton

They were Canadian made by the same manufacturer that made the cabinet grade plywood my supplier also sold. The cabinet grade stuff was every bit as good as one would expect. I just wonder how they could screw up the utility grade so bad.

Re: Utility Grade Plywood Question

#5

Re: Utility Grade Plywood Question

BrianMonumentCO

maybe the facility is where they "train" workers.

and use rejected materials from the good line.