Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Is slatboard the new pegboard for organizing?

Posts

Is slatboard the new pegboard for organizing?

#1

Is slatboard the new pegboard for organizing?

Ronster

I have some walls to reconfigure for tool storage, and I wish to have a flexible arrangement (cause I can't plan well enough to do it right the first time). I seem to recall seeing some shop pics where shopmonsters are using slatboard-looking systems or perhaps something homegrown to harness limited wall space well.

I've got multiple candidate walls for redo. One is near the bench, over cabinets with drawers, so it would hold the often-reached for smaller things. Others are near stationery tools, so there's bigger or heavier items like templates, jigs, crosscut box, blades, and clamps to support.

Pics? Experiences? Recommendations? Sources?

thanks,

ron

Re: Is slatboard the new pegboard for organizing?

#2

Re: Is slatboard the new pegboard for organizing?

David Hay

I'll be interested to hear the responses to this one as well, as I am considering how I want to arrange things on the wall in my shop. In particular, my rolling clamp cart hasn't worked out as well as I had hoped. It mainly remains parked in one part of the shop, taking up floor space.

I was considering building a french cleat system in a few places. That is, I would rip down some plywood, about 2-1/2" wide with a 45 degree miter and attaching the strips to the wall every 12" or so. Then I could make whatever fixtures I like to hold the tools or even make cabinets to hang from the cleats.

David

Re: Is slatboard the new pegboard for organizing?

#3

Re: Is slatboard the new pegboard for organizing?

William Duffield

It is very convenient. If you walk into Highland Woodworking or any Rockler or Woodcraft or Lee Valley store, you will see it used everywhere. Be careful not to overload this stuff. The core is MDF or particle board, and it's not really strong under tension. The woodworking supply store where I worked had a few failures when a lot of heavy merchandise was loaded on wide shelves. It would separate and the shelves and everything on them would drop on the floor without warning. It's easily repaired with screws and glue. I wouldn't use it for storage of lathes, belt sanders, etc., that have cast iron components or heavy motors.

Re: Is slatboard the new pegboard for organizing?

#4

Re: Is slatboard the new pegboard for organizing?

Dick Coers

My brother worked for one of those garage storage businesses for a short time. All there systems were based on plastic slot wall panels. Very expensive, but far superior for damp locations like garages. It was also narrow, maybe 12" wide. You can also get slide in aluminum inserts for the MDF slat wall for higher load situations.

Re: Is slatboard the new pegboard for organizing?

#5

Re: Is slatboard the new pegboard for organizing?

Tom

NOt for my shop. I find that stuff looks good in ads for a guy who owns a shovel and a few hammers.