Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

HVLP Spray Painting

Posts

HVLP Spray Painting

#1

HVLP Spray Painting

gfriend

Couple questions on HVLP Spray painting will be using water borne lacquer.

First what should the inside temperature be before spraying?

Second: If spraying a bookcase cabinet ..is it advisable to remove the top ... spray the inside of box & top separate then attach the top?

Re: HVLP Spray Painting

#2

Re: HVLP Spray Painting

Howard in Toronto

Check the manufacturer's specs for suitable spraying temperatures.

As for spraying inside carcases, you can adjust the gun's fan width and direction. Some guns are more sophisticated and allow more fine adjustment. Others aren't.

Some people recommend assembling components after finishing them. I've developed more ways of turning that concept into a disaster than anyone could envision. So I'm a bigger fan of taking my chances and really concentrating when I'm at the corners in an assembled project.

Howard

Re: HVLP Spray Painting

#3

Re: HVLP Spray Painting

gfriend

Thanks Howard...the real problem I have is trying to get finish on the apron at top of bookcase. Guess I could do this by brush. Its just a small 2 inch to 1 inch diameter

Re: HVLP Spray Painting

#4

Re: Spraying Aprons

Mark Mandell - Gone Round In New Jersey

Narrow your fan to about your 2" width tnan back off your material knob about 50% to prevent putting too much liquid on the small space. Also best if you orient the surface to horizontal to prevent sags and runs.