Chest of drawers is underway
Bill Tindall, E.Tn.

Step 1 is picking lumber, one of my favorite parts of a project. The table in the back of the picture holds the secondary wood drawer parts and internal framing parts. The drawers sides will be quartered poplar. Each of the walnut boards will be cut to length then folded back on itself and edge glued to make a side, about 17 x 48".

The first real woodworking is to glue up the false top which will be dovetailed into the top of the case sides. I use whatever sound but unattractive wood I have on hand for internal parts. In this case I am getting rid of some yellow pine I have had a very long time.
Note I don't use cauls for a panel glue up. With good technique and adequate clamps cauls should be unnecessary. (BTW, these clamps are the best in my opinion. they are strong, light weight, stiff and you can get them postage free until Jan 6 from Lee Valley.



