Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Temperary workshop

Posts

Temperary workshop

#1

Temperary workshop

james runchey

My house is on the market, and I'm toying with moving my shop to the basement in a 4 flat I own. Things are moving very slowly where I now live and we are spending most of our time in the apartment near our family members. My question is; will the power tools cause interference in the other apartments TV?

The wiring is all in individual breaker boxes to each apartment. The down side to doing this, is that should our farm sell, we'd probably be buying another house, but not having a workshop is driving me crazy in the interim.

Re: Temperary workshop

#2

JL

Re: Temperary workshop

JL

In my experience, if you have a decent ground connection - you have little or no interference due to the tools.

That being said - lights are another problem altogether. I don't if it is the inexpensive fixtures that I put in the drop ceiling or what - but whenever the lights are on, the FM signal is bad - for the radio near the center of the house. The radio next to the outside wall is fine.

Re: Temperary workshop

#3

Re: Temperary workshop

walta

I think setting up shop in your apartment building is a bad idea.

People rented a quiet apartment now all of a sudden somebody is running power tools all day long.

Doing so may give the tenants legal grounds to void their leases move and claim damages.

No it is not the same as the noise from repairs and renovations.

Some towns would consider your shop a business and would void your occupancy permits.

Walta

Re: Temperary workshop

#4

Consider hand tools: quieter, less sawdust


Re: Temperary workshop

#5

Re: Temperary workshop

John Lucas

I ran a shop in the back bedroom of my apartment for a year or more. I told all of the neighbors if I the noise bothered them to call and I would stop immediately. No one ever called and I ran a planer and jointer every now and then.

I may be wrong but the only tools I have that affect TV or radio are the power tools that have Variable Frequency Drives. You can get filters for these that supposedly stop that interference but I haven't had complaints from my currrent neighbors so I haven't done that.

Re: Temperary workshop

#7

Re: Temperary workshop

james runchey

Which tools would likely have variable frequency drives? This is completely greek to me.

Re: Temperary workshop

#8

Re: Temperary workshop

Larry Clinton At Frankfort, (Central) Indiana

Variable Frequency drives are often used to vary the speed of the motor on equipment. They are also found on some 3 phase to single phase converters - this also allows the variable speed of equipment like lathes etc.