Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Nutcracker

Posts

Nutcracker

#1

Nutcracker

Lee Schierer in McKean, PA

Last year at Christmas my son and his family gave me a Dazey nut cracker as a present since I had really liked the one that they had at their house. As the Christmas season approached this year I finally got around to making a nut bowl for the cracker. I also figured out how to mount the Dazey cracker in it so it is secure using machine screws and t-nuts so that I didn't have to drill holes in the base of the Dazey.



The octagonal bowl is made of solid cherry. The bevels were all cut on my TS using my Beall Tiltbox to set the angle. After cutting the eight sides, I had to make one very minor adjustment and re-cut the ends to get perfect joints on all eight sides. When the weather warms I plan to put on a lacquer finish.

Thanks for viewing

Lee

Re: Nutcracker

#2

That's a great idea

Howard in Toronto

And a SERIOUS nutcracker!

Thanks for the photo.

Howard

Re: Nutcracker

#3

You rarely see such a nutty idea.

Yonak

I like it.

Re: Nutcracker

#4

no need to wait for warm weather

Bill Tindall, E.Tn.

Spray it on. the low boiling solvents will flash off at any temperature leaving the lacquer tacky but largely dust free. then move item indoors to cure.

Re: Nutcracker

#5

Re: no need to wait for warm weather

Lee Schierer in McKean, PA

The bowl in in use for the holiday season so it will wait until after the holidays. I can apply my brushing lacquer and it will cure in freezing temperatures since it is solvent based.

Lee