I'll be curious to see how it looks with finish on the maple. Pretty showy right now! Just thinking, do you just spray clear on the abalone while finishing the wood? Will you warm up the finish on the maple, or use a water white because of the abalone? Wonderful craftsmanship!
Back in the late seventies, I was doing some work like that. I had done a serving tray for my Mom for Christmas. I saw my elderly neighbor sitting out back in her garden, and took it over to show her. When I handed it to her, her mouth dropped open, then she exclaimed. "Oh, that is wonderful, I do decoupage too !!!
Love the way the translucent shells represent this blossom. This reminds me of an outing I was on once, when a sudden Summer shower started, just before I came upon a nice patch of Morning Glories. Down in the neck of almost all of them was a wasp or bee waiting out the rain in the shelter.
The only nit I would have to pic, has to do with the composition. All leaning right, first leaf to the left of the main blossom. I hate to tell you this, but you need to trash the whole thing and start over. Ha
Have you kept track of your time on this one, and is it a commissioned piece?
Beautiful work, are you backing the abalone shell when you cut it? The product I use is so thin and brittle it fractures easily, also do you use a respirator while working with the shell?
Not sure on the finish yet, I'm leaning towards some sort of lacquer but I've used polyurethane based things on shell and it looks good. I prefer the maple to stay fairly white but I've also seen pieces shot with water white products that the finish would look better a little warmer like traditional nitrocellulose lacquer.
The flowers are made up of smaller pieces super glued together so the will bend a little. The first step is to route the space the inlay goes in to the thickness of the shell. I then either press the piece in using a wooden block or clamp it down to get it as flush as possible. To level it to the background I use a single cut file that is more on the coarse side ( a float would work well also but have never tried it)and level the whole thing and then sand starting with either 120 or 80 grit. I prefer to use sawn veneers for inlay since it gives me a lot of breathing room, if I use commercial veneers the leveling step is really important since the shell is much harder than the wood it is real easy to blow through the veneer layer where they meet. Also I never use 80 grit on commercial veneer, thats just asking for trouble
I didn't even think about that on the composition. to lay them out I take my tracings of the picture put them on a full size template and move them around until it looks best. I then ask my wife how they look and she fiddles with them( she has a better eye for composition then I do. So it a lot of arranging and flipping until I get what I want. But now I'm going down to the shop to obsess over how I would do it differently.
The piece is spec and I have about 50 hours in the inlay.
I appreciate the comments I feel like there is still so much to learn.
No backing, I'm using Abalam for the abalone and it is .050 thick. I usually use natural shell that is .060 but the abalam comes in nice size sheets and there is very little waste. Natural shell abalone comes in fairly small pieces and I would have gone through a lot of it.
Abalam is made from real shell sliced and diced and put back together again, it works like traditional shell and looks real good. Some colors and styles have more glue lines so those are only good for small pieces but the green Pau and pink abalone I used didn't, although the pink had some on the green they were really not noticeable at all.
I get all my shell at www.rescuepearl.com they have fair prices and a really good selection.
The morning glory theme reminds me of my favorite Art Nouveau artist designer. Are you familiar with his work?Rather than just having all the inlay flush, some was left high, then carved. One of my favorite pieces of his was a Firescreen, which like yours used a fiddleback ground. Check the link.
As for the shells, check out how he used it on that incredible bed with the moths wings. That should give you some inspiration for a possible way to add a little sparkle.
Wish someone would come along and commission me to do some Art Nouveau furniture.
You can find a lot of images of his work by googling his name and furniture.
I have a book on him by Philippe Garner, which ought to be in your personal library.
Thomas, thanks for that link. I bookmarked it for future needs. I wasn't paying much attention to the price, until the last sample, red. It seemed kinda expensive. Do you mind me asking how much you spent for materials on this piece?
Email me if you want to keep that under wraps. Thanks
Hey Tom I looked at your web site and your work is assume! So your middle name is Starbuck, would that be a connection to the Starbucks of Nantucket / New England?
wow most people think it has something to do with coffee, you're the third person ever to know the connection. My grandfather is a Starbuck and traces his family to Nantucket and they were whalers.