Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Flag case with box . . .

Posts

Flag case with box . . .

#1

Flag case with box . . .

Steve Mackay

I wanted to keep the badges away from the front glass AND provide some support for the "shelf" of the flag case above.

My solution is a "shadow box" within a shadow box.



Probably a bit "beefy" for the scale of the case but should lower the center of gravity and keep it from tipping over. The flag is pretty heavy on it's own.

Re: Flag case with box . . .

#2

Re: Flag case with box . . .

Lee Schierer in McKean, PA

When you go to add the flag, cut a piece of foam core poster board just slightly smaller than your triangle and carefully pin the front of the flag to it so the four stars are symetrical and centered. Hold the flag in place with straight pins poked into the side of the foam core.

Lee

Re: Flag case with box . . .

#3

Hmmmmmm . . .

Steve Mackay

I'll try that. I once did 58 funerals in a month on Post Detail. Always shot for five stars. With the pressure on (at waist height) I never really made the five centered and pretty. And then you present it and never see it again. With this one I've re-folded it a dozen times. It's straight and centered but I keep think'n it could look better. I'll give your trick a try. Thanks !

Re: Flag case with box . . .

#4

Re: Flag case with box . . .

John McGaw

It looks like a good solution. I was faced with a similar situation with a flag case for my late stepfather but never got beyond some sketches. My idea was to make the overall case rectangular with the flag triangle centered at the bottom and two smaller triangular shadow boxes for military memorabilia at top left and right and at that point I got stuck and stopped because some of the items were really not amenable to being mounted rather than sitting on a level surface.

Re: Flag case with box . . .

#5

Or better yet...Another perspective

Grant in Iowa

There is no "right" answer, but having been on both presenting and receiving side of a burial flag many times, I prefer this approach: Assuming it is a flag presented at a funeral, keep it folded just as the honor guard folded it and display it as such. Why?

In the photo attached, the flag displayed was folded for my wife's grandfather at his funeral by his close friends at his beloved American Legion Post. The job they did was perfect. Their tears are on that flag. I also did not polish the soot from the shell casings from the honor guard 21 gun salute.

To stretch it over something feels to this veteran as the wrong thing to do to Old Glory, and to refold it is...well unnecessary. That said, I can appreciate the idea of a "perfect display", and wouldn't begrudge someone the right to their own approach.

Indeed I generally wait to build a flag case until I have measured the flags dimensions. Often, a flags dimensions can vary enough that this makes a difference.

For me, the most important thing to be sure to do when building a flag case is to do your best work using the best plan you can muster. That is your role in this "case".

Your flag case looks very nice, Steve. A job well done, and well worthy of honoring the flag and its meaning.


FWIW,

Grant in Iowa