Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

More questions on Fluorescent fixtures/lighting.

Posts

More questions on Fluorescent fixtures/lighting.

#1

More questions on Fluorescent fixtures/lighting.

Barry Irby

Did not want to hijack the thread below, but this is similar.

The article posted below laid out the various bulbs as t-12 first generation, T-8 second generation, and T-5 as third generation with the associated dates. And my understanding is that there is regulatory pressure on to eliminate the T-12's. My shop is lit with a bunch of salvaged four foot T-12 fixtures and a couple of eight footers and they are getting more decrepit by the day. What to do?

I know I can buy T-8 ballasts and the T-8 bulbs will fit right into the existing fixtures, at least the four footers. Not sure about the single pin eight footers.

So, Can you buy the replacement sockets so that you can put T-5 bulbs in and old fixture? How about an eight footer/single pin.

Should I go to T-8's or are they becoming obsolete?

Should I buy new fixtures for the t-5's or try to cobble together a fix?

Re: More questions on Fluorescent fixtures/lighting.

#2

Too easy

John in NM

Don't worry about it until the t12's are actually gone.

If you actually want the brighter fixture or marginal energy savings, then by all means, upgrade for those reasons.

If the idea is cost savings or convenience, then stick to the t12's until that option is no longer available.

Re: More questions on Fluorescent fixtures/lighting.

#3

Re: More questions on Fluorescent fixtures/lightin

Bill Spievak

Search and you will find some refs to videos on this.