Should I get up a buy a new Li Ion drill driver?
JL
They have the 20 V Dewalt drivers for $99 at Home Depot and Ace.
I do have a somewhat crank 18 V and a newer 18 V driver.
Knowledge You Can Build On — Est. 1998
Should I get up a buy a new Li Ion drill driver?
JL
They have the 20 V Dewalt drivers for $99 at Home Depot and Ace.
I do have a somewhat crank 18 V and a newer 18 V driver.
Re: Should I get up a buy a new Li Ion drill drive
Bill Houghton, Sebastopol, CA
One of the things I appreciate about lithium-ion batteries is that the charged shelf life is really long.
Re: Should I get up a buy a new Li Ion drill drive
John McGaw
I don't know how many you really need. Earlier this year I bought a "DEWALT DCK265L 18-Volt Compact Lithium-Ion Drill/Impact Combo Kit" from Amazon and was really blown away by the performance. I had no idea how useful a small impact driver might be. The weight difference between these tools and the elderly Dewalt 12V drill/driver I had been using is amazing. I'm pretty certain that these two tools with batteries and charger weigh less than the old drill but the new drill seems to work just as well.
Re: Should I get up a buy a new Li Ion drill drive
Andy Lincoln,in Dearborn MI
Personally for the money I don't think you can beat the new generation of 12 lithium ion tools that are out there right now.
In a professional environment I have been using the Craftsman Nextec drill and impact driver for over a year. The chuck on the drill isn't the best I have ever used but 90% of the time it gets the job done.
The impact driver is sweet,will drive 3" screws without a problem.
Batteries are inexpensive at $21 (or less) each. Batteries last atleast 1/2 a day,sometimes longer.
HD has a 12 Makita set for Black Friday for $99 ,that I assume,having other Makita 18 v tools, is a very good set,replacement batteries are~$50 .
What I have come to enjoy the most is the light weight and compactness.For doing the type of work I do, cabinetry,framing,display and exhibit work they are great.That being said I would not try to bore 1" holes in hardwood or drill concrete with them.I have other tools at my disposal for such things.

