Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Cherry Rolling pins

Posts

Cherry Rolling pins

#1

Cherry Rolling pins

Joe in a Cleveland suburb

Hello.

I am making some rolling pins, or at least trying... for some family members for Christmas gifts from scrap cherry. Yeah, I'm cheap.

I read this thread with interest a couple weeks ago. I found Bill's explanations about 'rancid' and so on very interesting.

http://www.woodcentral.com/woodworking/forum/messages.pl/pro/search/pmd/sread/srchid/22526f7E3aOepEKmg8A21385386087/spage/1/sanc/472441/sbid/1000/md/read/id/472444/sbj/let-s-explore-this-objection/

So, for rolling pins, would just a quick wipe with some regular vegetable oil be good enough, and tell my family members to wipe them down with vegetable oil when and if needed?

Would you bother to warm the wood or oil up? Would you do multiple coats (I'm guessing no because it might get gummy)?

Thanks.

Re: Cherry Rolling pins

#2

Re: Cherry Rolling pins

Terry Quiram

I wouldn't put anything on them. However, if you feel you must then wipe them with a coat of mineral oil.

Re: Cherry Rolling pins

#3

Re: Cherry Rolling pins

John Veerkamp

As long as the wood isn't cold don't worry about warming the oil up. I recommend people use canola oil. I've been using Mahoneys Ulility walnut oil for the first application because that is what I use a lot of for other turnings. We have some rolling pins aver 80 years old that were never oiled until about 25 years ago. The lard , butter and then Crisco that were used never turned rancid. It's a perceived concern, not a demonstrated problem. Wash with warm water and mild dish soap after use and dry. Oil periodically if necessary.

Re: Cherry Rolling pins

#4

Re: Cherry Rolling pins

Bill Howatt

Another vote for "do nothing", it will pick up a bit of oil from the rolling process each time.

My wife just gives it a very quick wash and dry when she is finished and puts it away.

An advantage of putting a bit of mineral oil on it might be to make the grain look a bit prettier when it is presented.

Bill

Re: Cherry Rolling pins

#5

No finish needed

John in NM

When rolling out dough, it's excess flour sprinkled over the dough that keeps it from sticking to the pin. The pin will pick up some oil over the years, but I've never seen one that was actually finished in any way, usually they are just bare wood.

If you want to go for aesthetics, wipe on veg oil or mineral oil, whatever is handy. Type doesn't matter, as long as it's not 3 in 1 or something like that, still with a machine shop sort of smell to it.

One trouble with the aesthetics approach is that I've found people don't use the pretty stuff for fear of it becoming not pretty any more :D If you want them to be used, go for utilitarian looks.

Re: Cherry Rolling pins

#6

answers

Bill Tindall, E.Tn.

I am making some rolling pins, or at least trying... for some family members for Christmas gifts from scrap cherry. .....cherry with ample sap to provide interesting contrast makes the best kitchen ware. "Cherry scrap" is my preferred kitchen ware wood.

I read this thread with interest a couple weeks ago. I found Bill's explanations about 'rancid' and so on very interesting........Ellis and I are working on an Article for the articles section.

So, for rolling pins, would just a quick wipe with some regular vegetable oil be good enough, and tell my family members to wipe them down with vegetable oil when and if needed?.......Yes. What is pie crust? Grease and flour. Be assured that a used rolling pin will acquire ample oil/grease to stay well protected.

Would you bother to warm the wood or oil up?......no Would you do multiple coats.....no (I'm guessing no because it might get gummy)?.. yes

Thanks.....you are welcome. We expect pictures. Make them long enough to do a pie crust.

Re: Cherry Rolling pins

#7

to finsih...or not

Bill Tindall, E.Tn.

1. They will look better with something on them. But as someone said, kitchenware that looks too pretty never gets used. Oil will darken the cherry a lot. Eventually it becomes almost black. In previous house we had cherry butcher block counter top sections at the stove. Over time they became undesirably dark. Went with maple the next time.

2. If not a must, it will at least be desirable to pre-treat with something before the first use.

Re: Cherry Rolling pins

#8

Can't wait for the article...

Joe in a Cleveland suburb

I book marked that thread and I keep going back to it to read what you said about oils breaking down, molecules, and so on...

I find it interesting, but hard for me to remember/understand. :b

Thanks.