Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Cedar Chest Issue

Posts

Cedar Chest Issue

#1

Cedar Chest Issue

Ron in Sterling, CT

A friend of mine is refinishing a Lane Cedar Chest and has posed the following issue to me:

"There are some decorative strips on the front side that I would like to replace but I don't know what to call them or where to purchase them.

A description goes something like this.

They are "T" shaped strips of wood wrapped in polished aluminum. They are then glued in between a pair of wood trim strips.

The size of the clad aluminum over the wood is 7/16" wide with the wrap around about 1'8" thick. The height of the total strip is 9/32" and the base of the wooden "T" is 3/16"".

Can anyone provide any answers, or information that would be helpful for him. I have included some pics he sent to me of the piece described above:




Re: Cedar Chest Issue

#2

Not sure it applies, but....

Barry Irby

Such a strip as that applied to doors is called an Astragal.

Re: Cedar Chest Issue

#3

Re: Cedar Chest Issue

Bill Tindall, E.Tn.

I recently refinished a Lane chest that had trim strips at the intersection of the veneer pattern on the front. I thought they looked tacky and left them off.

Re: Cedar Chest Issue

#4

Ellis Walentine

Extrusions

Ellis Walentine

You might want to tell your friend to search for aluminum extrusions that match the profile you described, or at least come close to it. Depending on where you are, there may be extruders in your neighborhood, but I'm sure you can find a big selection if you do an internet search. You or he can make the wood part to fit the extrusion.

Note that extruders normally sell extrusions by the pound, and most are looking for industrial sized orders, so you might have to ask about "off falls" (scraps) or ask them about retailers who might carry the shape you want.

Just a hunch.

Ellis