Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

General Int. table saw router top

Posts

General Int. table saw router top

#1

General Int. table saw router top

matthew

… cast iron router top table for table saw that is … is too small! Yup - the 9 1/4 x 11 3/4 opening must be off (I think) as the brand new Incra Mastr-Lift II does not fit! I spoke to Woodcraft today and they said "General International is aware of the problem." I like Incra and have their fence mounted on my saw stop pcs. So, looks like I need another cast iron router top (or perhaps learn of another option) with an opening that will fit the above opening dimensions - any ideas?

Thank you!

Matthew

Re: General Int. table saw router top

#2

Re: General Int. table saw router top

garthinsandiego

Great product except that the cutout is too small (about 1/32" or so) on the long dimension. I solved the problem by grinding a little off my existing router base insert using a sanding disc on my table saw. Was relatively simple to do and only needed to touch up the radius on the two effected corners to achieve a satisfactory fit. Shouldn't have had to do it, but was not a show stopper. Otherwise, very happy with the table.

Re: General Int. table saw router top

#3

Chris Groves

Re: General Int. table saw router top

Chris Groves

The Bench Dog cast iron TS extension has a different sized plate recess.... you can wait for General to fix their process or take the one you have to a top notch local machinist... here is a link to the machining methodology for new cast iron: http://www.practicalmachinist.com/vb/cnc-machining/machining-profile-cast-iron-200562/

Re: General Int. table saw router top

#4

Chris Groves

Re: General Int. table saw router top

Chris Groves

On second thought I think Garth's solution is must better.... unless you plan to use the plate in another router table

Re: General Int. table saw router top

#5

Re: General Int. table saw router top

Alan in Little Washington (NC)

Make a "perfect" template and use a router with flush trim bit to enlarge the hole. Work slowly and carefully. Carbide will machine CI very nicely.

Re: General Int. table saw router top

#6

Re: General Int. table saw router top

John in NM

Is the problem that the opening is not the size they claim it is? That is easily fixed by a couple of the suggestions here.

Or is the problem that the router lift manufacturers are all also in the business of making router tables, and thus have a vested interest in keeping their plate sizes unique to their own line of offerings :D

Frustrating though that can be, the obvious answer to me is to figure out a way to make it work the way you want rather than be forced into a false brand loyalty :D

Re: General Int. table saw router top

#7

Re: General Int. table saw router top

matthew

As it turns out, I took the router lift back to woodcraftt where they had volunteered to sand the plate a little. They had another general cast iron table table and … whaddyaknow … the router lift fit like a glove! The opening in my first tabletop appeared to be about 1/32 or so shy (on the long side.)"

Hope you had a great Thanksgiving!

Matthew.