Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

A finish for Cypress?

Posts

A finish for Cypress?

#1

Alan Young

A finish for Cypress?

Alan Young

A buddy has an outdoor cart made of Cypress-It will be used for a barbecue stand-He wants to know the best product to apply to Cypress to give it protection from the elements as well as spills, oil, food and the like that might find its way onto a grilling table. Does it need a finish? I was thinking Spar Varnish-Any other directions?

-Alan

Re: A finish for Cypress?

#2

Re: A finish for Cypress?

Merle

Normally, I wouldn't finish cypress, but in this case I think it would be best to protect the wood from stains. Take a look at this as an option.

http://targetcoatings.com/products/exterior-top-coats/em9300-exterior-clear-polycarbonate-urethane.html

Re: A finish for Cypress?

#3

Re: A finish for Cypress?

John Veerkamp

A good weather resistant varnish will work well.

Re: A finish for Cypress?

#4

Re: A finish for Cypress?

don stephan

If a film finish is very thick, it will be prone to chipping which will then allow moisture under the film. Perhaps he could experiment with a very thin finish by thinning the liquid and applying with a rag?