Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Door Protection advice needed.

Posts

Door Protection advice needed.

#1

Alan Sweet

Door Protection advice needed.

Alan Sweet

The front doors to my church are exposed to the elements 24 hours a day; direct sun 6-8 hours a day, rain 2-3 times a week, our area of Alabama gets lots of mold and fungus growth, not to much cold weather. It seems like every couple years they strip down the doors and stain them. It always is done by volunteers from the church so who knows how many different approaches have been taken over the years. The wood is mahogany; looks like Honduran Mahogany, but they are over 20 years old and look in great shape.

Is there type of out door protection that can be put over the stain? They use a dark stain stain. From experience, I would say if nothing is done, I will start noticing a fade in about 8 months. Within a year, I would say it is definitely noticeable. After 18 months, it start looking like it need to have something done. I would like to help by buying and applying some protective surface which can prolong the time between the need to refinish.

Any ideas or suggestions? The doors can not be protected by any type of structure.

Re: Door Protection advice needed.

#2

Re: Door Protection advice needed.

RobCarr

Some kind of oil applied once or twice a year, but you'll still end up having to refinish it - went though the same thing with my front door, finally ended up painted it, although I loved the look of wood grain, paint is the only thing that *really* protects the wood in the long run with no maintenance. Painted it and haven't touched it over 20 years now.

Re: Door Protection advice needed.

#3

JL

Re: Door Protection advice needed.

JL

Spar varnish is one thought. If it works for boats, it ought to work for a door.

Cabot makes their Australian Timber Oil - that works well for decks and porches - so it should work for your door.

Re: Door Protection advice needed.

#4

Jason Roehl in Lafayette, IN

Keep in mind...

Jason Roehl in Lafayette, IN

...with transparent (waxes, spar varnishes and exterior polyurethanes) and semi-transparent (dye/pigment exterior stains), you're not likely to get more than 2-3 years of service between applications or re-finishings.

The bottom line is that the UV inhibitors in those finishes are sparse, and degrade over time. Once they do, the finish ceases to protect the substrate.

The more opaque the finish, the longer it will last, all else being equal. Also, you get what you pay for, but with transparent and semi-transparent finishes the scale is from about 6 months to 3 years. Solid color stain will extend that scale to perhaps 5-8 years, and paint might get you out to 20.

All of this, of course, is contingent upon proper prep work. And that's still no guarantee.

Jason

Re: Door Protection advice needed.

#5

Re: Door Protection advice needed.

Jerry Gibbs

You don't say where in Alabama you are located, but check with your friends on the Gulf coast. Boaters deal with this all the time. Locate a good chandlery in Pensacola, for example, and ask their advice. UV protection in a clear or amber finish is expensive. The cost of a marine varnish is directly related to the amount of UV protection. Otherwise go to a site like West Marine. Once everything is properly coated, occasional cleaning should contain the mold. Check the doors monthly. If there are cracks in the finish, touch up the varnish. Jerry

Re: Door Protection advice needed.

#6

Re: Door Protection advice needed.

Merle

I used Sikkens Window and Door on a mahogany door I refinished in Ft Worth 2 years ago. The door gets afternoon sun and it looks as good now as it did when it was freshly done. They make a couple different colors and sell small sample sizes to help you make the best choice.

Re: Door Protection advice needed.

#7

Re: Door Protection advice needed.

William Duffield

Sikkens Cetol

If you choose a polyurethane, you will need to completely strip it and restain when it wears out. If instead, you choose a more traditional varnish, and reapply when it starts to show stress, it will bond to the previous coats of varnish (but not to previous coats of poly, which is very selfish).