Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

4 Nov 2013

Good Morning Everyone,

We had most excellent weather this past weekend and the temps were nice and cool for working in the shop. Typically, nobody calls me or wants to come by the house for any reason on a weekend...but this past weekend was the exception to the rule. The LOML Jr and I started working on her blanket chest (I have been saving the wood for it for well over 15 years now, a buddy of mine wanted help with cutting and gluing up wood for a benchtop that he wanted made, a friend from church came by and dropped off an old tiller that he is needing repaired (my son-in-law is an excellent small engine mechanic and he will do the work on the tiller), and a buddy of mine came by to drop off my trailer and to see what all we had going on in the shop. WHEW.!!!! That was one busy day AND I almost forgot, my son's and I were working on my bike and my college aged son's bikes in between the times of woodworking stretches. Played bass guitar at church on Sunday, visited with friends, spent time with the family on Sunday, and just generally had a really nice weekend. Woodworking on Saturday reminded me of my very real need for getting my saw blades sharpened or buying new ones. Talk about dull. I sure wish that there was a local sharpening service around here.

Well, that's it for me.......so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Alan Young

Made the rounds to my kids houses-

Alan Young

Growing up in a 1/2 Norwegian household my mother and her side of the family always made Lefse for Thanksgiving and Christmas. After 30 + years Son no 1 and I made our first test batch of Lefse in preparation for Thanksgiving



Helped Son #2 strip and start to refinish an Oak Table. Here he is with the table and a coat of new stain just applied: After it sets we'll- or I should say he'll start applying the topcoat-


Then last night I finalized a bed design for Daughter and SIL.

The accents on the head board and bolt covers on the footboard will be iron plates made by SIL-who has started a small metalworking shop-with forge and other cool things!

Re: WC Weekend Accomplishments....

#3

Re: Made the rounds to my kids houses-

Bruce, a MN Galoot

Fresh lefse with butter, sugar and cinnamon? Pretty tough to beat!

Re: WC Weekend Accomplishments....

#4

Might be of interest.

Gary Smyth

I found this lidded cedar wood boxed sample set still in the original cardboard shipping container. I thought it might be of interest to for WC viewers to see what was available as of May 1, 1950. The cost then was $8.50. The wood box sliding cover has the address of the West Elizabeth Lumber Co. That company, located on the bank of the Monongahela River in PA, still exists. West Elizabeth is printed on the box lid but apparently it was purchased and available from Washington, D.C. Lumber trade/lobbying organization. The box contains 54 numbered wood samples approx 2 1/2” x 4”, a key for the numbers on the wood samples (see blue paper list). With the samples and key there is an order form, a study guide, and a wood experiment teacher’s guide. The box also included a knife and a really decent 10x magnifier. Only the magnifier was present in my box. Note the telephone numbers. The Atlantic number was for Pittsburgh nine miles down river. The towns of Elizabeth and West Elizabeth number is three digits. The papers included the kit are in the pics. The raw wood samples I pulled from the box, clockwise from top left, are Magnolia, Cherry, Birch, Maple (hard). Note that in a covered box, even after fifty years, the cherry sample has not changed color. I wonder if some Federal department or lumber trade group still offers something like this?

Re: WC Weekend Accomplishments....

#5

As to the bed

Gary Smyth

Since there are already going to be books you might want to consider wiring the headboard to include capability for lights/radio/phone/cable router/computer/TV control. Easy to do now and can be visually unintrusive. In the long run it will be more convenient than putting up with separate wiring for multiple devices.

Re: WC Weekend Accomplishments....

#6

indeed of interest

Bill Tindall, E.Tn.

where did you find it?

Re: WC Weekend Accomplishments....

#7

Found in a local town named Library

Gary Smyth

within fifteen miles of West Elizabeth Lumber. Yet another garage sale. Easily passed over as it was just a dusty cardboard box on a shelf in a basement. As I remember the original owner wasn't a woodworker, but like most folks around here, a "fixer". (I'm guessing that the home owner worked at West Elizabeth or was a teacher who ordered it from there). I purchased from a relative "cleaning out the house" prior to putting it up for sale. Covered with dust he writing on the box caught my attention. West Liberty Lumber used to be the source for "exotic" or at least nice looking wood in the area. They had several open buildings that as recently as ten years ago still had chestnut, 6/4 maple, cherry, and redwood which was a difficult find around here. That yard has been here for a long time loading tow boats with big stuff serving the mines and mills. They are a "old fashioned" yard and are located right on the river. But the place has been the victim of the economy and out of the ordinary flash floods and ice jams for the past several years and frankly, until I checked this week I thought that they died. They have cut their inventory these days to mostly construction lumber. I do to a lot of similar house sales, but just luck I was there when it was still available.

Re: WC Weekend Accomplishments....

#8

Re: Might be of interest.

james runchey

Very interesting. I have a similar set out in the shop that I bought from Craftsman wood service in Chicago about 1959. Mine didn't come in a nice box though, just 2 cardboard slip-sleeves. I doubt Ive looked at them more than a half dozen times since I got them. These are 2 1/2 x 5" and about a quarter inch thick, with paper labels identifying the species.

Re: WC Weekend Accomplishments....

#9

Went to the cabin, worked some, and canoe trip. *LINK*

Keith Newton

My cousin and I worked on his cabin next-door to ours, hanging car-siding in the great room. I'll post some photos when we get finished, and everything cleaned up.

Benny, the cousin gave me a ride upstream, so I could float that same stretch that I floated two weeks ago. I really wanted to shoot several of the same scenes which I took before, but in their Fall colors. The Cypress trees were almost prime, so I was happy to be there. But I got there about an hour later than before, so ought to have my butt kicked for missing the golden hour, but it worked out pretty good.

I was really hoping to get another chance to get some shots of those Alligators, but they were not out this trip.

Got back to the shop today, to find a couple of friends who were over here last week when I got back. Before, they were trying to find out what they needed to do to get a project finished that was one they wished they had never taken. I pronounced this job reaches the level which designates it as "Snake Bit". ha.

Same project this week, new material, stainless steel, came in, with all four corners bent. John, pronounced the job has reached a new level "Death Spiral". I wouldn't be surprised if next week there is a another new low. I'm trying to remember the term in astronomy where an object reaches the threshold of a black-hole, where it gets ripped apart, and even light gets pulled back. Oh, "Event Horizon". He he

I added about 5 pics onto end of the other set on my flickr site from the creek.


http://www.flickr.com/photos/7391658@N03/10679690965/in/set-72157636840667075/

Re: WC Weekend Accomplishments....

#10

sharpening

Bill Tindall, E.Tn.

There are few places without a "local" sharpening service. Ask at a near-by cabinet shop where they get stuff sharpened. You may be able to drop off the blades at a shop where a regional service makes a pickup. If you need to mail them I suggest Misenheimer in Morristown TN. My sharpening philosophy is that any place that makes blades knows how to properly sharpen them, balance, straighten and tension plate, etc. .

Re: WC Weekend Accomplishments....

#11

added a deer to the coming year's menu

Bill Tindall, E.Tn.

.....and it's certified "Organic".

I suppose I should post this on the "hand tool" side as it was shot "traditionally". I can barely see well enough to hunt with iron sights, but still good enough if patient. With the year's need for raw material for Chilli, Sauerbratten, and breakfast meat accomplished now I can get back to woodworking.

Re: WC Weekend Accomplishments....

#12

Re: Went to the cabin, worked some, and canoe trip

William Duffield

Great photos, Keith, but I can't say I have much appreciation for the Flickr interface. What kind of hawk? I think I have one that resembles it a lot that has been raiding the bird feeders in my back yard lately. It comes through at least two or three times every day. Maybe I could pay him extra to take a few squirrels instead? The song birds have plenty of cover for now, but it's getting thinner, and we had our first freeze yesterday morning.