Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Who here builds metric cabinets?

Posts

Who here builds metric cabinets?

#1

Who here builds metric cabinets?

Henry Higginbotham

I'm thinking kitchen cabinets, but comments on anything related are welcome.

Is there a "standard" thickness for face frame and door stock? 20mm seems logical to me, but . . . .

What about depth and height? Does 12" get extended to 310mm, rather than 305mm which is nearer 12"? Are base cabinets built 600mm? 610, 620?

I'm making an effort to build everything possible using metric. It's so much simpler and the pile of mis-cut lumber doesn't grow nearly as fast. But I wonder if I'm in for some D'oh! moments that could have been avoided by listening to the voice of experience, which is what I'm seeking here. The rest of the Internet hasn't been as much help as I'd expected.

Re: Who here builds metric cabinets?

#2

Base 10 vs Base 8

Mark Mandell - Gone Round In New Jersey

Other than being able to use fingers or toes to count, I've never noticed the difference other than being pissed off when I have to go hunting for a metric socket set when my SAE's won't fit the @*&! nut . . .

Personally, I can make a 2.5cm mistake just as easily as I can screw up by 1", so my pile will grow at the same rate. :D

Re: Who here builds metric cabinets?

#3

Re: Base 10 vs Base 8

Yonak

Mark, are you thinking Tom Lehrer's New Math here ? "Base 8 is just like base 10, really. If you're missing two fingers."

Re: Who here builds metric cabinets?

#4

Dis Lil Piggy . . .

Mark Mandell - Gone Round In New Jersey

went . . .all da way home. Despite bonafide attempts, I can still count to 10 with my shoes on.

:D

Re: Who here builds metric cabinets?

#5

Re: Who here builds metric cabinets?

paul in AZ

I use both. If some measurement is critical I find it simpler and more error-free to add, multiply or divide in cm. and millimeters rather than /32nds and /16ths.

Overall dimensions of a project -not so much. I really can't think in meters for cabinet sizes.

Re: Who here builds metric cabinets?

#6

Re: Who here builds metric cabinets?

Jeaae Cloud

Google 32mm cabinet system - there's a whole discipline built around it

Re: Who here builds metric cabinets?

#7

EuroSystem

Mark Mandell - Gone Round In New Jersey

I actually use the 32mm hinge system for cabinet doors (when I'm doing concealed hinges) and have made use several jigs based on that. But all my machines are calibrated and ruled to SAE and I see no reason to attempt to change. So long as functions are kept separate, there's no conflict.

Re: Who here builds metric cabinets?

#9

Re: Who here builds metric cabinets?

Bill Howatt

You may want the thickness of material to be say a nice 20mm but you likely will find it is something like 19mm although 1mm isn't too much to get excited about but differences can add up.

What you have to watch out for is if there is anything that is relying on a standard size and your metric fudging, e.g., 310 instead of 305mm causes a problem. One might speculate that if too much leeway was taken with rounding to nice metric sizes maybe an appliance wouldn't fit properly under the counter or a counter top might require custom sizing instead of standard.

I have a couple of books by the Cdn cabinet builder the late Danny Proulx including one on 32mm frameless cabinets. It is obvious from the drawings the primary dimensions are Imperial which are then converted to metric such as 22-3/4" or 578mm rather than 580mm or 22-27/32".

Bill

Re: Who here builds metric cabinets?

#10

I stick to inches...

John in NM

Works fine as long as I don't go finer than 32nds :D

But its all what you are used to :)

Re: Who here builds metric cabinets?

#11

Re: EuroSystem

Joseph Mulherin, sr

I think this whole thing camE about when the 1st President Bush said we are all going to go to the Illuminity world where we all would be better off....NUTS!!! it screwed up our whole nation letting the damn europeon systems invade our way of life and the way we woodworkers do our measure4ments for one thing...and the manufacturers are the ones who were just like sheep being led to do this....nuts!

Re: Who here builds metric cabinets?

#12

Thanks, Dick.  Useful info that I'd missed

Henry Higginbotham

I did see a link to (maybe) this PDF, but from the name I didn't suspect that it went beyond shelf holes, and so never clicked on it.

There's probably a lot of good information here, once I wade through all 28 pages of diagrams. BUT, Blum has this set up in the way that several WCers here seem to think I want to implement metric. Not so--the whole idea is to get as many dimensions as possible to even multiples of 10mm* so as to simplify setups and cut down on errors. Building something to the imperial size, while pretending to use metric units, doesn't accomplish that.

I would guess that Blum intended these drawings more for a large company with fancy CNC gizmos, rather than for me.

-------

*Not always possible: At least one of my rail and stile sets produces a 5/16" tongue, so I'd have to add 15.875mm to any dimensioned rail length when cutting the stock. Maybe we could just say 16mm. :)

Re: Who here builds metric cabinets?

#13

Re: I stick to inches...

clay foster

I'm from Texas. The only part of the metric system that ever caught on there is 9mm.

Re: Who here builds metric cabinets?

#14

     


Re: Who here builds metric cabinets?

#15

Jim in Burlington Ont.

Re: Who here builds metric cabinets?

Jim in River Oaks, Ont.

Mostly metric,

The scales are simple and the tools are available, makes measuring and layout very simple. Still use Imperial when I have planes or tools that best work, but find it's no preferred, Long Live the Queen but I still prefer to work with a moving decimal rather than fractions of fractions

Take care,

Jim