Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Looking for old article on scavenging motors

Posts

Looking for old article on scavenging motors

#1

Looking for old article on scavenging motors

Henry Higginbotham

Somewhere, I think in some woodworking magazine, maybe ten years ago, I read an article about finding and salvaging electric motors (suitable for woodworking machinery) from junk yards.

There was useful information about where to look and what to look for, along with some field-testing suggestions.

Sound familiar to anyone? Any idea where you saw it? I probably still have the magazine, pack rat that I am, but would like to narrow the possibilities somewhat instead of sifting through all the stacks. And it may have been a 10-15 year old magazine when I read it, so . . . sometime in the last 25 years?

Re: Looking for old article on scavenging motors

#2

Re: Looking for old article on scavenging motors

Mark Nowicki

Fine Woodworking search results for "electric motors"

http://www.finewoodworking.com/pages/fw_articleindex.asp

Results for Wood

http://www.woodmagazine.com/wood/search/indexSearchResult.jsp?_requestid=1080503

Popular Woodworking Index ( only goes back to 2004)

http://www.woodmagazine.com/wood/search/indexSearchResult.jsp?_requestid=1080503

American Woodworker Index

http://americanwoodworker.com/blogs/reviews/archive/2009/02/06/american-woodworker-magazine-index-of-past-issues.aspx.

Your local library should have periodical indexes.

HTH

Mark

Re: Looking for old article on scavenging motors

#3

Thanks, but . . .

Henry Higginbotham

I probably should have mentioned that I'd already attempted to use the magazines' on-line search pages without success. I could very well be using the wrong search terms (I've tried what I though were the likely suspects), and it's also possible that those search pages don't work any better than those of the borgs. Anyone else ever notice that you can sometimes search for something on the Lowe's or HD sites, come up empty-handed, and later find the product page (by other means) with a title containing the exact words you searched for?

Re: Looking for old article on scavenging motors

#4

The word is...???

Tom Dunlap

It's amazing that with the amount of information we have available at our fingertips we're still stymied because we can't think of the right word. This happens to me a lot. I've learned to plow ahead with whatever word first comes to mind. Along the way my search takes two paths. One, buy fits and spurts, to the answer I was looking for. Second...down the google rabbit hole and leads me to some other information. Sometimes, mostly not, this information is useful. Most of the time it's only entertaining ;)

Tom

Re: Looking for old article on scavenging motors

#5

Re: Looking for old article on scavenging motors

Jerry Gibbs

I remember the article in Fine Woodworking. I will look through the paper indexes later if I get the chance. You might search by motor type, which would have a lot of hits. One of the motors discussed was repulsion, which would be a more rare search term. Jerry

Re: Looking for old article on scavenging motors

#6

Can't help with the article, but.....

Barry Irby

Where are you? In Richmond Va there is a company (Dempsey) that buys and resells industrial equipment and tools. I bet there are similar re-sellers in most cities. Most of what he has has 3 phase motors. Single phase motors are either worthless to him or very valuable, depending on the size and application. Its worth a trip there to scavenge. Its sort of a flea market on steroids. The reaction can be either horror or fascination. (both) I get parts and switches from him occasionally. Look around locally and see if you have such a place. You might also try the Habitat for Humanity Restore if you have one. (a shot in the dark).

Re: Looking for old article on scavenging motors

#7

FWW no 94 p76

Jerry Gibbs

confessions of a junkyard-motor junkie

Re: Looking for old article on scavenging motors

#8

Re: Looking for old article on scavenging motors

Jerry Nicholson

My 6" Sears (Atlas) metal lathe has a 2 speed reversible washing machine motor. My drill press has a sump pump motor. The compressor in my garage has a 3/4 horse furnace blower motor. My Lee Valley 1" belt sander also has a furnace blower motor. The half-sack cement mixer that I no longer have had a water pump motor. OK - so I am a cheapskate!

Jerry

Re: Looking for old article on scavenging motors

#9

That's it!

Henry Higginbotham

Having the issue number made all the difference. I'd sifted through the pile earlier and looked at the handful of titles on the covers. It's not on the cover, but it IS listed on the spine. Thanks much!

Re: Looking for old article on scavenging motors

#10

Re: Can't help with the article, but.....

Henry Higginbotham

Richmond's a bit far from northeast Alabama, but if it were closer I'd be there wading through the junk. Sounds like my kinda place.

Re: Looking for old article on scavenging motors

#11

this is what WC is for