Macassar Ebony Door (Moving Wall)
Hikmet C. Sakman
Hello Everyone,
Ellis, here is the story of this door. Without any hesitation, this has been the most challenging project ever. It took me a while, like 3 months+ to complete this project. It is mainly built with 1/2" and 3/4" ApplePly and macassar ebony veneer, some hard maple and wenge.
Most painstaking part was the slow process of gluing so many jointed (splined/tenon & mortise) parts, probably over 2000 pieces, cut in batches to identical sizes, high precision, otherwise, 1/32" off ends up being 3/8" at the other hand. However, given its 81" height, 72" width and 6" thickness, it is indeed a moving wall and diagonal measurements for square was only off by 1/16" that lead to perfect balance and movement, which is smooth as silk.
I designed and got the hinge made by a machine shop, compression bearing at the bottom (in the floor) and regular sealed bearing for the rest.
Compression bearing was buried in a block of plywood which was buried in a space in the floor by epoxy, although it was pretty tight in a square hole in the concrete floor to begin with.
Veneering was relatively the easy part, but keeping edges undamaged, given approx. 600lbs+ weight (measured by what went in it+ 2 gallons of glue) was a challenge.
This door went to a 7000 sqft penthouse suite (3000 sqft of it is wrap around huge deck) on the 9th. floor with amazing 360* views of Victoria, BC., all the way to Port Angeles, WA.
This door has an electro-magnetic lock, which can be operated by a remote or iphone which, in fact can control the entire house.
Here are the pictures, just ask away what you need to know.
[URL=http://s233.photobucket.com/user/sfww/media/oct3postwc/IMG_1964.jpg.html]




