Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Finish for firewood closest

Posts

Finish for firewood closest

#1

Finish for firewood closest

Kevin French

I pulled all the old plaster out of a closest we use to store firewood and lined it with leftover Ash flooring.

Thinking about using an oil finish instead of poly as it will be beat with every fill up and an oil finish would be easier to reapply.

Any suggestions on the oil to use?

Re: Finish for firewood closest

#2

Re: Finish for firewood closest

Larry Clinton At Frankfort, (Central) Indiana

Personally I would use Shellac. A couple of wiped on 2 ~3 lb cut coats would provide better protection against moisture than either BLO or Tung oil and won't scratch quite as easy. It is probably the easiest finish in the world to touch up, just wipe on another coat and it will re-dissolve the old finish and blend right in. Even if you decide to sand out deep scratches later you can wipe on over the sanded area and it will blend right in again. I usually use a lighter cut for re-coating - like a 1 lb. I don't like to brush Shellac, I either wipe it on with a saturated rag or spray. An old cotton tee shirt works well, after it has been washed many times doesn't leave lint. I have use the new "microfiber" cloths - they also seem to work well.

Re: Finish for firewood closest

#3

Why finish it?

paul in AZ

When I lived up north I used to burn a lot of wood. Unless you are super gentle with your firewood that closet will get beat up in no time. Why finish it?

Re: Finish for firewood closest

#4

Re: Why finish it?

Kevin French

That's why I was thinking of a yearly wiping of oil.

The humidity here is a bit higher here in New England then AZ, with a lot of wet rainy days in the fall throwing wood in there.

Re: Finish for firewood closest

#5

Linseed oil

Bill Tindall, E.Tn.

What it will do is resist the transfer of stain and dirt from wood to walls. It will still dent but overall it will look better, if that is a goal. Might also consider painting. Will need to re-slather now and then.

Re: Finish for firewood closest

#6

Re: Linseed oil

Kevin French

Thanks Bill, I'm just looking for a little moisture protection. The dents will just add character and are inevitable.

Re: Finish for firewood closest

#7

Re: Why finish it?

paul in AZ

I used to live on the north shore of Boston and burned 4-6 cords/year in an airtight stove. All oak and maple logs stacked outside a year or more. Unless you are burning green wood moisture shouldn't be all that big a problem.

Why not cut a couple of air vents into the top and bottom of the door to let air circulate a bit?

Re: Finish for firewood closest

#8

linseed oil may go rancid in enclosed space

Dick Coers

Is there a door on the closet? I think linseed oil may take a rancid smell in an enclosed space without air flow.

Re: Finish for firewood closest

#9

Open air space now

Kevin French

It was a small closest but I've blown the door and frame off and opened it up.

Re: Finish for firewood closest

#10

Jesper, Denmark

Re: linseed oil may go rancid in enclosed space

Jesper, Denmark

Linseed oil will smell, well, like linseed oil. Once dry, it will not go rancid like some non-drying oils.