Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Question about appearance of a project

Posts

Question about appearance of a project

#1

Question about appearance of a project

AZ in Colorado Springs

My daughter found a photo on line of a mission style hallway table and mirror. She asked if I'd build such a piece for her, in 'a dark stain color.'

I know that mission style furniture is most authentic in quarter sawn oak with a fumed finish. Well, I have more than enough walnut on hand for this project, and this will provide a dark appearance.

I'm wondering if a mission style piece in walnut will look, well, odd. Anyone ever done this?

Thanks

Andy

(I have not calculated the bf ft of this, and so cannot estimate my cost avoidance -- I realize I might be looking like a cheapskate.)

Re: Question about appearance of a project

#2

Re: Question about appearance of a project

Stephen W. Schoene

Walnut is perfectly satisfactory as a wood for arts and crafts furniture. It also has the advantage of needing little if any dye and stain to achieve a naturally dark appearance. I do think it is desirable to leave light colored sapwood in the cutting room scrap bin.

Re: Question about appearance of a project

#3

Re: Question about appearance of a project

Dick Coers

I'm at the stage of my work where there is no place for stain in my shop. I've stained wood for way too many years. If Mother Nature didn't do a good enough job on the color, it doesn't need to be made. Walnut would be perfect for what she wants.

Re: Question about appearance of a project

#4

Re: Question about appearance of a project

Stew

I've had good success with Mission/A&C stuff in walnut.

Re: Question about appearance of a project

#5

Thanks for the advice