Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Cider press parts - finish or not?

Posts

Cider press parts - finish or not?

#1

Cider press parts - finish or not?

Stephen Kirk

I had to rebuild some parts of a cider press we inherited, namely the catch bin which the basket sits on. I know the old logic is to not put any finish on a part the juice can touch. But, today's water based finishes are food safe and can more than stand up to the juice. The whole thing is white oak, so it'll last a good long while. Many recommend coating with vegetable oil, but I worry that can soak in and go rancid. The original seemed like raw wood. I'm the third recipient of the press, so it may be over 100 years old. The original was nasty enough that I didn't want to just try and clean it up.

I like Generals High Performance Poly, it's tough stuff.

So, finish or not? Or leave it raw and care less since it'll probably last another 25 years anyway.

Btw, the press was made by an Italian gentleman who worked for Bethlehem Steel. It's made out of steel beams. He used to press grapes for wine. Then it went to another couple we know who did wine and cider. Now we have it and it will continue to make good stuff.

Re: Cider press parts - finish or not?

#2

Re: Cider press parts - finish or not?

Bill Tindall, E.Tn.

I don't understand why it will not have an indefinite lifetime unless stored outdoors in the weather. I would not finish it with anything, just like wine and cider barrels, if I intended to use it. If the plan was to use it as decoration then I would finish it.

BTW, a local cider maker uses a small yard shredder for mushing up the apples.

Re: Cider press parts - finish or not?

#3

Re: Cider press parts - finish or not?

Stephen Kirk

May get stored outdoors, but under cover, so no worries there. This fella is heavy, it's 1" thick white oak, little under 30" square. I figure it's over built, but that was the original and I wanted to do right by it. Instead of just nailing the parts, I captured the bases in grooves on the sides to keep any metal away from the juice.

The old timers liked to build 'em tough.

So, if apples are ground in a yard chipper, how is it cleaned? Neat idea though, I'll be building a better grinder. Small one came with it. I'd like something a bit bigger.

Re: Cider press parts - finish or not?

#4

Re: Cider press parts - finish or not?

Lee Schierer in McKean, PA

My dad rebuilt a cider press and he finished the bottom tray with several coats of polyurethane. He also coated the staves and presser with polyurethane. We never had any problems with it in more than 20 years. It sure was easy to clean up when we were done for the day. We did store the press inside.

Lee

Re: Cider press parts - finish or not?

#5

Re: Cider press parts - finish or not?

Howard Acheson

>>>> But, today's water based finishes are food safe and can more than stand up to the juice.

I'm not sure that's wholly true. First, all finishes whether waterborne or oil based sold in the US since the mid 1970' have been required to be non-toxic when cured.

Second, waterborne finishes have improved quite a bit in recent years. But, they still don't stand up to many of the chemicals and substances that do not affect oil based finishes. That said though, I don't know if a waterborne finish would be affected by apply juice.

I think a basic thing to do would be to google "cider mill" and see what is recommended for a finish.

Re: Cider press parts - finish or not?

#6

Bob

NOT


Re: Cider press parts - finish or not?

#7

Re: Cider press parts - finish or not?

Howard Norman

I would not consider using any finish on the oak. I have made a lot of wine over the years but never cider. Never any finish on any of the wine making vessels or apparatus.