Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

This project looks like a big zipper. *LINK*

Posts

This project looks like a big zipper. *LINK*

#1

This project looks like a big zipper. *LINK*

Keith Newton

A friend ask me to help him with a steep back stair for a house he designed which is being built. I thought it needed to be an alternating tread, to make it easier to walk. The rise run ration is 9 5/8" rise, and 7" run, which hits the sweet zone, of two rise, and one run, hitting around 26". If they had been straight, when heading down, you would only be looking at a 7" tread to hit with each step, but with this, there is 11.5" showing for the next step

I chose to use the ~ curve because it allowed me to glue up the tread blanks to 18", then cut two out of it, without any waste. The ends connect to the stringer by tapered sliding dovetails, which really locks things together.


http://www.flickr.com/photos/7391658@N03/sets/72157635655027455/

Re: This project looks like a big zipper. *LINK*

#2

Re: This project looks like a big zipper.

Bill Houghton, Sebastopol, CA

Thomas Jefferson, or whoever actually figured that stair design out, was such a genius, and your take on it is really nifty.

Doing some online reading to check on my memory that Jefferson invented this design, I was surprised to find code references - apparently at least some model building codes accept the stair, although only for loft access.

Re: This project looks like a big zipper. *LINK*

#3

Re: This project looks like a big zipper.

Keith Newton

Hum,,,,,,, This is a back stair, behind hidden book cabinets on both ends. Maybe the inspector won't ever find it..

Re: This project looks like a big zipper. *LINK*

#4

I know I must be missing something

Henry Higginbotham

My first thought was that, on the part of the tread where you'd be stepping, the grain runs out to an unsupported edge. What keeps the front edge from splitting off? What am I missing?

Re: This project looks like a big zipper. *LINK*

#5

Re: I know I must be missing something

Keith Newton

I do have a big long screw in there, and the gentle curve lengthens the support the further from the front edge back.

Re: This project looks like a big zipper. *LINK*

#6

not for those with attention deficit disorder

Bill Tindall, E.Tn.

Used properly, and carefully, it is a clever and attractive solution to the problem. Used by someone lacking attention to the situation and it is an injury waiting to happen. As much as I like its artistic merits I would not risk it.

Re: This project looks like a big zipper. *LINK*

#7

Re: not for those with attention deficit disorder

clay foster

I would have it in front of my house just to keep out people who are too dumb to climb stairs.

Re: This project looks like a big zipper. *LINK*

#8

Clay, You are giving me ideas.

Keith Newton

I'm thinking I need to do an M C Escher staircase out in the shop. I think I could take his ideas to a new level. %\)...k

Re: This project looks like a big zipper. *LINK*

#9

Rick L

Re: This project looks like a big zipper.

Rick L

I have a book that deals with exactly that type of step it's of European origin but I'm not at the home right now.

Re: This project looks like a big zipper. *LINK*

#10

Jason Roehl in Lafayette, IN

I laughed...

Jason Roehl in Lafayette, IN

...at that response.

I gotta say, I think they're pretty neat, but my head does spin just thinking about having to use them. I can't imagine someone with limited agility being able to use them (such as an elderly person who can only shuffle-step up one step at a time).

Jason

Re: This project looks like a big zipper. *LINK*

#11

Hey Rick, send me a link,

Keith Newton

I'd like to see / learn more about them. This is not my first, and I may actually be doing another, closer to a ladder slope soon.

Re: This project looks like a big zipper. *LINK*

#12

Re: Clay, You are giving me ideas.

Yonak

Jason, of you get that Escher staircase worked out, by definition, you will reach a new level.

Re: This project looks like a big zipper. *LINK*

#13

Re: I laughed...

Keith Newton

Yea Jason, they are easier than a ladder, or just straight treads across a steep stair, but there are tradeoffs. It certainly is not good for a one legged person, and pets may have a challenge. Heck,,,,,,, I have a challenge now. My right knee needs to be worked on. I've got an appointment next Monday with a specialist, and really hoping for some relief.

This is not the only stair in the house, but a secret back stair. I can't tell you any more than that, because I don't want to have to shoot anybody to keep the secret. ha

Re: This project looks like a big zipper. *LINK*

#14

OTOH

Mark Mandell - Gone Round In New Jersey

You'll be on the same level, unless, of course, you meet Bowie on the way up/down ;)

Re: This project looks like a big zipper. *LINK*

#15

Couldn't help but think of Gordon Lightfoot

Gary Smyth

2nd verse.

I can picture every move that a man could make

Getting lost in her lovin' is your first mistake

Sundown ya better take care

If I find you been creepin' 'round my back stairs

Sometimes I think it's a sin

When I feel like I'm winnin' when I'm losin again

Re: This project looks like a big zipper. *LINK*

#16

Ellis Walentine

Nice project, Keith!

Ellis Walentine

I've never had occasion to make one of those, but I'd copy your design in a heartbeat. One question would be about grain direction, and whether scooping away half of the tread leaves you with a shortgrain situation on the fat part. Maybe you could orient the grian on your glueups so that it more or less runs parallel to the sine curve.

Ladders are dangerous liability territory. You wouldn't want to get nicked.

Ellis

Re: This project looks like a big zipper. *LINK*

#17

Thank for the feedback Ellis and All.

Keith Newton

As I mentioned earlier, I already had a 4" screw through the fat part, but I really wished I had used something a lot longer, and heavier, so I went shopping, and came back with some 6" long deck screws which have a 5/8" flat head, are hardened, and claimed to be stronger than a 3/8" Lag Screw, which is not hard to believe. I've had a number of those break off at the top thread before when power driving them.

The last thing I ever want is a call-back to come fix something, especially as difficult as this would be. However, I feel very confident that these fasteners are adding a lot to the overall design.