Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Crown mouldings/ orientation/second opinions

Posts

Crown mouldings/ orientation/second opinions

#1

Crown mouldings/ orientation/second opinions

micheal

I came here several months ago to get help with crown moulding install. Learned i needed a miter/chop saw, couldnt/shouldnt attempt it with table saw,should have expert do it and the like.(Second opinions) Turns out i could and did do it without a miter/chop saw or expert on a table saw. Built a fixture lagre enough to keep me and my hands well away from the no guard blade. After several( A bunch) of trys i finally realized that the moulding face needed to be turned away from me and towards the saw blade. (Orientation) Im working on a piece of shop furniture (LouisXV style) cabinett for a growing collection of flea market- swap meet find planes and braces. Other than the faseners, glue and no mortise hinges the material is dumpster trash,salvage stores, pick ups from road side piles and scrap from my waste bins. The crown mouldings add alot to the overall appeal of the piece. One last word; the fixture/tablesaw method worked for me because in large part the pieces are not more than six feet in length.

Re: Crown mouldings/ orientation/second opinions

#2

Re: Crown mouldings/ orientation/second opinions

Barry Irby

Congrats on getting it done with the tools at hand. While I am always looking for a good excuse to buy new toys, I take a lot of pleasure out of making something out of nothing and without a lot of spending.

I have always cut crown molding with a chop saw. Not a compound miter saw,but a simple chop saw. Further back I cut it with a back saw and miter box. The way I did it was to cut it with it upside down in the saw.

You have raised the concept of whether to apply the wood to the tool or the tool to the wood. With a miter box, you position the wood and then bring the saw to bear. With a table saw, you set it up and apply the wood to the blade. I see no reason you couldn't cut crown molding on a TS except that in my shop the pieces would have to be pretty short. Its a pretty small space. Too bad bird houses don't need crown.