Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Gluing fabric to wood for a card playing surface

Posts

Gluing fabric to wood for a card playing surface

#1

Gluing fabric to wood for a card playing surface

Stephen Kirk

I'm nearing the point on my gate leg card table where I can glue down the fabric. I'm thinking of using a spray adhesive, spraying both fabric and wood. Start with oversized fabric and then trim to fit. I'll do a test first, of course.

And other ideas on gluing down fabric that will leave the fabric still soft?

Re: Gluing fabric to wood for a card playing surface

#2

Re: Gluing fabric to wood for a card playing surfa

Bill Tindall, E.Tn.

I have glued felt and plush with contact spray.

Re: Gluing fabric to wood for a card playing surface

#3

Re: Gluing fabric to wood for a card playing surfa

Stephen Kirk

That's what I figured I'd use, regular old 3M brand.

Funny, I really want to get this done and play some games! Time for a round of Flux.

Re: Gluing fabric to wood for a card playing surface

#4

test the concept

Bill Tindall, E.Tn.

just like in finishing, it will be best to test what ever you are going to use.

Re: Gluing fabric to wood for a card playing surface

#5

Jason Roehl in Lafayette, IN

Re: Gluing fabric to wood for a card playing surfa

Jason Roehl in Lafayette, IN

Fluxx is evil. You, sir, are a masochist. :D

Jason

Re: Gluing fabric to wood for a card playing surface

#6

Re: Gluing fabric to wood for a card playing surfa *LINK*

Jack Plane

Traditionally, baize was attached to card tables with flour paste. The reason flour paste was employed and not hot animal glue (with or without a hot iron) was because of its slow set time which allows plenty of time to manoeuvre and position the fabric.

You don't want to find yourself in a position where the glue has grabbed and you haven't perfected the alignment of the cloth.

The following blog post may be of some interest to you...


L for Leather

Re: Gluing fabric to wood for a card playing surface

#7

Re: Gluing fabric to wood for a card playing surfa *LINK*

Jack Plane

You may also find this post of interest...


Baize

Re: Gluing fabric to wood for a card playing surface

#8

Re: Gluing fabric to wood for a card playing surfa

Stephen Kirk

That is such a good article. I opted for synthetic suede leather, so this may work nice. Time to raid the kitchen to test. The surface is already finished, so I'll need to see if it still adheres. I like the ability to remove it if I ever need to.

Re: Gluing fabric to wood for a card playing surface

#9

Re: Gluing fabric to wood for a card playing surfa

Stephen Kirk

Star Flux must be double evil then!

Re: Gluing fabric to wood for a card playing surface

#10

Spray the wood only.

Lee Schierer in McKean, PA

I would use 3M Spray adhesive and spray only the wood. Spraying the fabric directly is likely to lead to wet spots or bleed through that will be unsightly. Test the procedure on some scrap first.

Lee

Re: Gluing fabric to wood for a card playing surface

#11

Re: Gluing fabric to wood for a card playing surfa

Paul Vander Woude

If feasible in your design, I think I would try to avoid the use of an adhesive altogether. The felt will wear or get stained, and you will want to be able to replace it. Also, it would be possible for the adhesive to bleed through the felt, or become exposed as the felt wears. When I recovered my slate pool table, the felt was stapled to the wood backing of the slate, around the edges, and not glued. (I know there are slate tables that do have glued felt as well, but I always felt they didn't play as well.)

Re: Gluing fabric to wood for a card playing surface

#12

I use spray contact on leather.

Keith Newton

Only spray the substrate, then quickly lay it upside down on the fabric stretched out flat on another surface to avoid wrinkles. You can then flip it back over, and smooth out from the middle with your hands to push it into the glue better

Re: Gluing fabric to wood for a card playing surface

#13

Bob

Re: Gluing fabric to wood for a card playing surfa

Bob

I go to the auto supply store and buy the stuff used on head liners, works well.