Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Tinting wipe on poly

Posts

Tinting wipe on poly

#1

Tinting wipe on poly

Gary Smyth

Has any one been successful adding TransTint dye to satin wipe on poly? I'm intending to try to achieve the color of a "Chinese" red, with the figure of the wood showing through. The work is a small box, pretty straight forward with no crannies except inside corners. I have several applications of mixed dye/denatured alcohol on and dry. Any resulting wood nubs have been sanded. Now to build a little depth with the dye held in with the resin poly - if it will work. Picture to show color wanted.


Re: Tinting wipe on poly

#2

No, But

Mark Mandell - Gone Round In New Jersey

I wouldn't hesitate to try it with TT in dewaxed shellac. Way faster build and more control plus easy reversal of an S-U.

Re: Tinting wipe on poly

#3

Re: Tinting wipe on poly

Bill Tindall, E.Tn.

I think the effect you want is done with tinted lacquer.

Re: Tinting wipe on poly

#4

Found answer to question

Gary Smyth

Discovered answer to my own question.

From Joe Woodworker site

"Adding TransTint to Other Products

TransTint Dyes can be added to a wide variety of finishing products like waxes and glues. The following list illustrates the unique uses for this product.

Add to waxes to make a one step colored wax/stain for use on decorative objects and turnings

Add to water miscible glues like yellow and white to disguise glue lines

Add to veneer glues to make squeeze-out blend in on figured woods like crotch mahogany

Add to epoxy to make clear colored fillers for filling knots and cracks

Mix with shellac or water base finish for touch-ups on damaged finishes (scratches and dents)

TransTints will not mix with oil based finishes like stains, varnishes, polyurethanes, linseed and Tung oil. You can usually work around having to add TransTint to oils by using TransTints in shellac or some other medium that it does mix with. "

Thanks to all.

Re: Tinting wipe on poly

#5

Re: Found answer to question

Yonak

Gary, if you find a way to do it, making the color thin enough to let the grain show through yet have the result not end up looking pink, I would appreciate your letting me know how to do it. The times I have tried this kind of trick I have not had good results. Just recently I thought I'd try to tint some otherwise perfectly good looking pecan a Chinese red. No matter the mix I used it ended up looking like Pepto Bismol. I finally had to color it a canned mahogany color .. not nearly the result I wanted.

Re: Tinting wipe on poly

#6

I would use universal pigments

Keith Newton

with the poly if it were me. You can dye first, but then as you build up the poly layers, you can let it show through by sanding through the heavier areas, then using more diluted layers toward the end,

Re: Tinting wipe on poly

#7

Re: Read the Instructions

William Duffield

Jeff's website first says not to do it, but then tells you how to make it work. It still won't work for intense colors like that doorway. The problem is that the dyes are not miscible with oil based varnishes. You can premix the dye with acetone, and then add the dye/acetone mixture to the varnish. Pay very close attention to the maximum ratios of dye to acetone to varnish. If you overdo it, it won't all mix. You then must use it in a hurry, before the acetone evaporates and the dye separates from the varnish.

The problem I have with mixing the dye with shellac and other finishes that it will dissolve in (instead of pre-dying the wood before finishing) is that the thickness of the finish very strongly affects the depth of color of the dye, and it is very difficult to get an even thickness of finish. The uneven thickness is not important if the finish is mostly colorless. At the other end of the spectrum, consider a sunburst guitar top, where the thickness of the dyed lacquer is closely controlled to achieve the color gradation.

Keith offers you good advise. Use universal pigments instead of dye.

Re: Tinting wipe on poly

#8

The one exception...

John in NM

Add a little acetone and it will mix into oil finishes. The downside to this is that the acetone tends to make the oil finish softer, or at least add a significant delay to achieving full hardness. I'll use the trick when I have to, but I usually find another solution instead.

The other thing is that oil mixed with some TT and acetone will not keep. You have a few days to use it, then it gels (at least the stuff I use does, never tried it with straight tung oil).

Re: Tinting wipe on poly

#9

I see William got it before I did

John in NM

Ah well, probably ought to read all the responses before adding to them :D

William offers good advice.

Re: Tinting wipe on poly

#10

More on "Chinese Red"

Gary Smyth

I wondered why "Chinese Red" was so popular in ancient times and difficult to locate today. Wikipedia has much about the color but it is now called vermilion. What follows is strongly edited from Wikipedia. Go to that source for a more complete listing.

"Vermilion is a brilliant red or scarlet pigment originally made from the powdered mineral cinnabar, and is also the name of the resulting color. It was widely used in the art and decoration of Ancient Rome, in the illuminated manuscripts of the Middle Ages, in the paintings of the Renaissance, and in the art and lacquerware of China, where it is often called "Chinese Red".

The term cinnabar was used interchangeably with vermilion until the 17th century, when vermilion became the more common name. By the late 18th century 'cinnabar' applied to the unground natural mineral only.

Vermilion is a dense, opaque pigment with a clear, brilliant hue. The pigment was originally made by grinding a powder of cinnabar, the ore which contains mercury. The chemical formula of the pigment is HgS (mercury-II sulfide); like most mercury compounds it is toxic.

Vermilion is not one specific hue; Mercuric sulfides make a range of warm hues – from bright orange-red to a duller bluish-red. Differences in hue are caused by the size of the ground particles of pigment. Larger crystals produce duller and less-orange hue.

Cinnabar pigment was a side-product of the mining of mercury, and mining cinnabar was difficult, expensive and dangerous, because of the toxicity of mercury. The Chinese were probably the first to make a vermilion as early as the 4th century BC. In the early ninth century the process was accurately described by the Arab or Persian alchemist Jabir ibn Hayyan (722–804).

The process described by Jabin ibn Hayyan was fairly simple. Mercury and sulfur were mixed together, forming a black compound of sulphide of mercury, called Aethiopes mineralis. This was then heated in a flask. The compound vaporized, and recondensed in the top of the flask. The flask was broken, the vermilion was taken out, and it was ground. When first created the pigment was almost black, but as it was ground the red color appeared. The longer the color was ground, the finer the color became.

During the 17th century a new method of making the pigment was introduced, known as the 'Dutch' method. Mercury and melted sulfur were mashed to make black mercury sulfide, then heated in retort, producing vapors condensing as a bright, red mercury sulfide. To remove the sulfur these crystals were treated with a strong alkali, washed and finally ground under water to yield the commercial powder form of pigment. The pigment is still made today by essentially the same process.

Vermilion has one important defect; it is liable to darken, or develop a purplish-gray surface sheen.

Genuine vermilion pigment today comes mostly from China; it is a synthetic mercuric sulfide, labeled on paint tubes as PR-106 (Red Pigment 106). The synthetic pigment is of higher quality than vermilion made from ground cinnabar, which has many impurities. The pigment is very toxic, and should be used with great care."

Re: Tinting wipe on poly

#11

Nice to be learning so much,

Keith Newton

One little bit of info you have not shared with us, is what wood you started with, which would be helpful for anyone wanting to give you any meaningful advice, since you are wanting it to show through.

Some of these pure primary colors need a certain base coat or primer color, then the right base or carrier for those pigments, otherwise, the base may be fighting the expected color, throwing it off.

It sounds like you are wanting to achieve something that needs lots of layers, with the final coats more clear while the lower layers more opaque, or translucent, with a clear tops adding a lot of depth

Re: Tinting wipe on poly

#12

I don't think it can be done the way

Gary Smyth

I intended. Chinese red is opaque. Read more about "Chinese Red" below in other post. I did find a percentage formula for RGB which gets me close to the color I want (but the name of the color changes). Go to perbang color search and play. Scroll down to the color wheel. Move the outside circle to the color range, Then move the inside circle to the shades within that color. Hit Go. Find most any color and the formulas for that color. Nice site.

R G B

Chinese Red #1 49.8. 0, 7.1

Chinese Red #2 72.2 7.6 21.2

Chinese Red #3 60, 0, 8.2

Re: Tinting wipe on poly

#13

The wood is birch

Gary Smyth

I was hoping to get it to look like old Kiri (paulownia). but with a Chinese Red color.


Re: Tinting wipe on poly

#14

Come to think of it...

John in NM

It would be smart to do this with shellac or lacquer -- oil is going to yellow over time, which will spoil the red color.

Maybe WB poly, though I find it a bit on the blue side for this. Perhaps that has changed, it's been years since I used any.

Re: Tinting wipe on poly

#15

Re: Tinting wipe on poly

GolfSteve in Calgary

This looks like a perfect application for paint top-coated with something glossy.

Re: Tinting wipe on poly

#16

Give It 3 Steps, Mister . . .

Mark Mandell - Gone Round In New Jersey

1. TransTint dye in alk applied by sponge or spray.

2. 2 coats of dewaxed ultra pale shellac with heavy TransTint applied, double-hit style, via wide fan HVLP.

3. Top with Waterborne clear, Target Emtech 9000, General Enduro Clear Poly, or General HP Poly.

Waterborne will take three applications with HVLP. Assess the color after shellac and 1st WB coat. To deepen the "shade", add small amount TT black dye to the next coat.

All this you do on a test board before going to the project.