Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Newbie saying hello!

Posts

Newbie saying hello!

#1

Newbie saying hello!

Jack Plane

I finally worked this place out (I'm Irish, leave me alone) and have just signed up.

So many pages to browse!

Re: Newbie saying hello!

#2

craigd

Re: Newbie saying hello!

craigd

Hello! and welcome - several of us really enjoy your blog.

Re: Newbie saying hello!

#3

Re: Newbie saying hello!

David Yoho

Welcome, JP. It can be overwhelming at first trying to wade through the vast content here. There's definitely much to see and read.

Whether you're into turning, collecting or using hand tools, or everyday woodworking discussion, there's a messageboard dedicated to the topic where you'll find plenty of insightful information.

I would invite you to click over to our Shop Shots department and have a look at some of the wonderful work our followers have shared. No doubt you'll find a treasure trove of work spanning the years since it began. I'm sure you'll find some ideas that may inspire your future efforts in your own workshop.

Enjoy,

David Yoho

Editor - WoodCentral's Shop Shots



NEW SHOP SHOTS!

Re: Newbie saying hello!

#4

Re: Newbie saying hello!

John Veerkamp

Welcome, I've been coming here since October 1998. The best and friendliest wood working site for me. Ellis and crew do a great job in keeping WC on track.

Re: Newbie saying hello!

#5

Re: Newbie saying hello! *LINK*

William Duffield

Welcome to Wood Central, Jack.

Not meaning to belittle any of the work our members have posted on your column or elsewhere on Wood Central, David, but if you want to enjoy a real treasure trove of information on English and Irish antiques from 1680 to 1820, and on the very impressive reproductions of them that Jack has done, you must visit his blog, Pegs and 'Tails.


Pegs and 'Tails

Re: Newbie saying hello!

#6

Re: Newbie saying hello!

David Yoho

Thanks, William. That is sure some fine looking work and information there for sure. Sorry for my ignorance as I didn't know who I was responding to.

Also I fixed the link that had one too many http// in it and should work now.

Re: Newbie saying hello!

#7

Link didn't show up - try again

David Yoho

Pegs and Tails

Re: Newbie saying hello!

#8

Re: Link didn't show up - try again

David Yoho

I give up. no time right now to figure it out.

Re: Newbie saying hello!

#9

Re: The Link - Corrected *LINK*

William Duffield

Sorry, David, I should have previewed my post.

Here is the link to Jack's blog. It works this time.

I'm not surprised you didn't know anything about who he is. On this side of the world, I would suspect only SAPFM members and their ilk would be familiar with his extraordinary work and knowledge of English furniture history.


Pegs and 'Tails

Re: Newbie saying hello!

#10

Re: The Link - Corrected

Jack Plane

Thanks for the warm welcome and kind words chaps!

Jack

Re: Newbie saying hello!

#11

Moses Yoder

Re: Newbie saying hello!

Moses Yoder

I would like to hear some stories about your name. I suppose in most circles you just say "Hi, I'm Jack" and no eyebrows are raised. In a group of woodworkers though, if you introduced yourself as Jack and somebody was curios to know your last name and you stated "Yes, well, it's Plane" I can just imagine the responses. "Jack Plane, yes, it's my real name." "Greetings. I'm Spade Bit."

Re: Newbie saying hello!

#12

Re: Newbie saying hello!

Jack Plane

John Paul Lane = Jack P. Lane = Jack Plane