Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

baltic birch plywood

Posts

baltic birch plywood

#1

baltic birch plywood

Jack Putnam

I am working on a project with 1/8 inch birch plywood. It is to simulate a fly fishing reel only just a little bit bigger about 5 inches in diamiter. My question is what can I cover the birch plywood to protect the wood from comming apart. It will be used outside probably in some rain, snow, and sun. I don't know of any other 1/8 inch plywood that is made for outdoors that I could use instead of the baltic birch.

I'm hoping that when I coat it with some kind of sealer it will ware a long time. Thanks for any suggestions.

Re: baltic birch plywood

#2

Re: baltic birch plywood

Don Stephan

An Internet search on marine plywood found boulterplywood.com with 1/8" marine plywood.

Re: baltic birch plywood

#3

Re: baltic birch plywood

John Lucas

I would just use a thinned epoxy.

Re: baltic birch plywood

#4

Re: baltic birch plywood

William Duffield

Marine plywood, used for skinning small sailboats, kayaks and canoes is carried by Chesapeake Lightcraft in Annapolis, www.clcboats.com. If you use epoxy to treat it, be aware that it is susceptible to attack by UV light from the sun. If it is going to spend a lot of time in the sun, you will need to protect the epoxy with something with UV inhibitors in it (e.g., a spar varnish).