Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Chinese wood species . . .

Posts

Chinese wood species . . .

#1

Chinese wood species . . .

Steve Mackay

I got drafted to fix a mess on a Chinese SKS rifle stock by the BIL. The previous own took an Easy Out to the sling mount screw (and we all know how THAT turns out !). I Googled for half an hour but couldn't get anyone to 'fess up to a species of wood. Any guesses ?


Re: Chinese wood species . . .

#2

closer pic would be nice


Re: Chinese wood species . . .

#3

Closer . . .

Steve Mackay

You can also see the butchery inflicted on an innocent piece of wood. :O


Re: Chinese wood species . . .

#5

Re: Chinese wood species . . .

John in NM

The ones I've seen up close appear to be a stain over very bland hardwood with a khaya or meranti look to it. But there are thousands of species that would fit that bill, and I would suspect that the stock wood was sourced in China and might not be a species we even recognize.

If the rifle were sufficiently old, it could have a Russian birch stock. IIRC, some early Chinese SKS's were Russian. More likely though, the rifle is of commercial 1980's production, the bulk of Chinese SKS's imported were made new for our consumer market before importation was restricted.

Are you looking for a patch wood? Probably something in the Philippine mahogany range or even genuine mahogany would match ok if you stained over it. African mahogany is often coarser grained than that stock looks to be. You could even try a bit of birch if you have any... I'm always amazed how many military stocks are birch heavily stained to look like something else - and in many cases they do really look like something else until you get under that stain.

Re: Chinese wood species . . .

#6

Looking again...

John in NM

That one does look a little different than most I've seen, this pic is typical of what I was attempting to describe:

If I wanted to let in a patch for the damaged screw area, I would probably look for some birch and see how it matched the density and grain.

Re: Chinese wood species . . .

#7

Re: Chinese wood species . . .

Robin Corell in Atascadero,CA

The Chinese have been harvesting birch in Russia for years so there is a good chance it could be birch.

More importantly it is an SKS which is an inexpensive non collectable rifle. Any utilitarian repair you make that returns it to service would be appropriate regardless of the wood you choose to use. For that matter you could use epoxy or even bondo since it is on a non critical area.

Robin

Re: Chinese wood species . . .

#8

Yes Sir . . .

Steve Mackay

You're right. Since the fix is hidden under the swivel plate we are going for a "user" fix. I was just curious what flavor it might be. Thank you.

Re: Chinese wood species . . .

#9

Re: Chinese wood species . . .

Robin Corell in Atascadero,CA

The Chinese have been harvesting birch in Russia for years so there is a good chance it could be birch.

More importantly it is an SKS which is an inexpensive non collectable rifle. Any utilitarian repair you make that returns it to service would be appropriate regardless of the wood you choose to use. For that matter you could use epoxy or even bondo since it is on a non critical area.

Robin

Re: Chinese wood species . . .

#10

Re: Looking again...

Hikmet c. Sakman

What I see in this picture is not birch, I assure you it is not birch.

Chico...

Re: Chinese wood species . . .

#11

Re: Chinese wood species . . .

Larry Clinton At Frankfort, (Central) Indiana

Most likely it is Catalpa ovata (Chinese yellow Catalpa), most of their rifles were fitted with this species. I have a few SKS and an AK rifle. All were fitted with this as received.

Re: Chinese wood species . . .

#12

Re: Closer . . .

walta

The grain of the wood look like an elm maybe Siberian elm

Walta