Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Delta Air Cleaner

Posts

Delta Air Cleaner

#1

Delta Air Cleaner

Merle

I have the 50-875 model and the inner 1 micron filter needs to be replaced according to the instructions in the manual. They call them disposable, but that goes against my grain. Has anyone ever cleaner the inner filter? How did you do it?

Thanks,

Merle

Re: Delta Air Cleaner

#2

Re: Delta Air Cleaner

RobCarr

I have two of those and have yet to replace the filters (after about 6 years of hobby use), figures since I bought replacement filters when I purchased the units new! With the unit on high, does the needle stay in the red? I used to have a link, can't find it right now, that showed that 'dirty' filters actually worked better, I think they called the buildup 'cake.'

Re: Delta Air Cleaner

#3

Re: Delta Air Cleaner

Merle

Rob, the needle is just barely in the red section with the unit on low. I have also heard that a caked filter works better, but I don't overload the motor and shorten its life.

Re: Delta Air Cleaner

#4

This is how

Hoa in Alameda

Steal a "vacuum cleaner crevice tool."

Using a 1 1/4" Forstner bit, drill a few holes on either side of the "flat" section. Offset the positions of the holes on so that they don't "go through."

That's what I use to clean the inner filter.


img

Re: Delta Air Cleaner

#5

Re: Delta Air Cleaner

RobCarr

I was told the needle is calibrated to be read with the unit on high, sounds to me like your filters are just getting broken in! :)

Re: Delta Air Cleaner

#6

Me too

Tony - Memphis

Except I just drilled lots of smaller holes. Also tried to make it smooth as rough edges catcht the fiber of the filter and snag it. I've been cleaning mine for years. I replace it every few years figuring the shop vac doesn't get it all.

Tony

Re: Delta Air Cleaner

#7

Re: Delta Air Cleaner

Merle

Today I vacuumed it out using Hoa's crevice tool and that seems to have done the job for now. Thanks for the help.