Wood frame in car *LINK*
Tom Dunlap
The wooden portion of the vid tour starts at about 5:40.
The rest of the vid is interesting too.
Morgan Car
Knowledge You Can Build On — Est. 1998
Wood frame in car *LINK*
Tom Dunlap
The wooden portion of the vid tour starts at about 5:40.
The rest of the vid is interesting too.
Morgan Car
Re: Wood frame in car
Jerry Nicholson
Years ago I read in a car magazine that it had long been rumored that the same guy had painted every Morgan made - with the same brush. Supposedly when the president of Morgan was asked about this he hesitated and then said "we use a spray gun now".
Jerry
Re: Wood frame in car
R Payne
I've heard they no longer have wood frames. I think it's a shame as when I first saw they were wood framed, I started thinking I'd like one.
ron
Re: Wood frame in car
Tom Dunlap
The frame is made of aluminum...you'll see this in the beginning section of the video. The car can be driven without the body.
The wood frame supports the aluminum sheeting that forms the body.
Re: Wood frame in car
John Veerkamp
years ago I owned and partially restored a 1925 Chevrolet 4 door sedan. From the chassis up the frame was wood, The body panels were heavy gauge sheet steel nailed to the wood frame. The "firewall" and floor were also wood. The wood was not a wood like oak or maple, more like poplar. Cottonwood was even used on some regionally produced cars.
Re: Wood frame in car
Bill Houghton, Sebastopol, CA
The British held on to wood frames under the bodywork longer than about anybody, although wood continued in various forms for quite a while. Our 1973 Volvo station wagon had plywood panels covering the space where the third seat went, and our slightly older Saab sedan before that used polygons of plywood mounted on a spring-loaded rod for seat height adjustment. They apparently found these approaches cost-effective compared to wood. American cars continued to use wood, mainly plywood, in some applications into the late 50s, even perhaps into the 60s.
And, of course, high-end cars still use wood veneer for interior trim.
And then there were the tiny maple blocks that were part of the gasketing on my 1949 Studebaker's motor.
But Morgan's definitely a holdout in continuing the Auld Traditional Ways for its bodywork. They used ash for a long time, which I've found puzzling, since it's not a terribly durable wood when exposed to weather; but maybe English ash is more durable than American in that application, or maybe Morgan hoped the steel coverings wouldn't leak.