Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Low Profile Drawer Slides

Posts

Low Profile Drawer Slides

#1

Low Profile Drawer Slides

Mark Bienstock

I need to replace the side drawer slides on a teak dresser. The existing slides are only 1/4" inch wide and there is not enough space between the outside drawer sides and the inside dresser sides to install the standard 1/2" wide slides. I have been unable to find slides on-line with a width less than 1/2". Does anyone know where I can get narrow side drawer slides? Thanks.

Re: Low Profile Drawer Slides

#2

There is an article...

John in NM

In an older FWW about shop made full extension guides... those might suit your needs. I was just looking at that article a few weeks ago, thinking of building a small chest for drill bits, like a Huot cabinet but out of wood.

I can't remember the issue number, but I'll do some poking around and see if I can find it.

Why do the guides need to be replaced?

Re: Low Profile Drawer Slides

#3

Issue #143


Re: Low Profile Drawer Slides

#4

Re: Low Profile Drawer Slides

Barry Irby

How about under mount slides?