Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

wood and concrete benches

Posts

wood and concrete benches

#1

wood and concrete benches

clay foster

I taught a class last year on combining wood and cast concrete elements. One of the students was Reggie. He is currently assembling these benches he made from cast concrete and cedar. I think he was a good student.


Re: wood and concrete benches

#2

Re: wood and concrete benches

Barry Irby

These look great.

Question....Do you think there could be an issue with the bottom cross piece if the wood swells when wet?

Are there bolts cast into the legs for the attachment of the cross pieces?

Re: wood and concrete benches

#3

Re: wood and concrete benches

clay foster

There are bolts cast into the concrete. If the wood swells, it well compress before the concrete breaks. When the wood contracts, it may leave a small gap in the joint, but the bolts are what holds it all together. Correcting myself, the wood is cypress.

Re: wood and concrete benches

#4

Re: wood and concrete benches

Alan in Little Washington (NC)

Those are very nicely done. Those are good looking castings- I suspect he used a vibrator to make there were no voids or air pockets.

Re: wood and concrete benches

#5

Re: wood and concrete benches

clay foster

Rubber mallet.

Re: wood and concrete benches

#6

Re: wood and concrete benches

Jennifer Indy.USA

Reggie did such a great job on these! He had a pretty good instructor too. And on that note....Clay will be teaching a similar class next year July, 20-26th at Arrowmont in Tennessee. Great place, great class and an awesome instructor :)

Jen