Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Isn't anyone building something to talk about?

Posts

Re: Isn't anyone building something to talk about?

#26

question

Bill Tindall, E.Tn.

How did you make the finial?

Re: Isn't anyone building something to talk about?

#27

Good one Mark,

Keith Newton

Glad I had finished my coffee when I read this.

"The idea, see, is to get you all bopping from one store to the other so each of them gets traffic and a few of your scheckels while you spend the maximum amount of time as "active consumer" so that their carefully constructed isles and displays have a greater likelihood of getting your impulse-buy business for whatever you forgot to put on the list that you left on the kitchen table and are trying to remember without calling your wife to read it to you because you don't want her thinking you're loosing your memory . . .[breathe]"

Using all your commas by the end of the third word, is telling. Ha

I'm bad at loosing my note pad too, so often use a scrap of wood, which sometimes gets tossed. Now I'm trying to train myself to put everything in "notes" in my iPhone. Using the voice feature can be faster, but entertaining.

Re: Isn't anyone building something to talk about?

#28

Re: question

Tony - Memphis

I turned it, marked it, then sawed the center of the "grooves", then carved the material away from the grooves, then finished with a rasp and a file.

There is a good video of Phil Lowe showing the technique on FWW. These are not what I would have done for a piece of furniture. I hacked them out pretty quickly. We'll see how they hold up to the weather.

Tony

Re: Isn't anyone building something to talk about?

#30

Re: question

William Duffield

Charles Neal Ownby made a pair of youtube videos of the process he uses, and offers a few suggestions for alternatives during the demonstration.

http://www.youtube.com/watch?v=LDw_X14W4RI

http://www.youtube.com/watch?v=qxTt5wZdl80

http://www.youtube.com/watch?v=RWyI4hLhr7w

I usually do the layout a bit differently, using a pair of dividers instead of the tailor's tape measure, and just drawing the spirals with a pencil instead of using the layout tape. I also draw twice as many longitudinal lines and twice as many spirals, one set for the valleys and the other for the ridges.

If you want to use the tape measure, you might find one at a sewing store, but you can pick them up for free at IKEA.

Also, the carving goes a lot quicker if you start with a die grinder (mine is a Grex) and a Kutzall carbide burr. I've used carving gouges for the shaping, but that takes too long. Note also that Charles Neal is carving a reeded finial, while I more often do fluted finials. It makes a difference in the shapes of the rasps, files and gouges you choose.