Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Bird Houses

Posts

Bird Houses

#1

Bird Houses

Ken Romines

I need some advice from the group. I am building a mail box post with a pseudo bird house on top. The bird house will be about three feet tall and 6-8 inches in diameter. The staves will be cut from 1 inch thick treated yellow pine. The top will be a copper covered turning. The house will be painted, probably a darker color, I like black, but my beautiful spouse would probably prefer purple. Now the questions:

1. Should I cut/drill openings into the bird house for ventilation? The interior will get rather warm since our temperatures in west Texas tend to reach 100 plus during the summer. I do not want birds or insects (wasps, bees, etc) to have a new place to build a home.

2. If I cut/drill openings how do I keep the critters out?

3. One option is to fill the interior with urethane foam. What effect will that have on longevity?

4. How would you do it?

Thanks in advance for the help.

Ken

Re: Bird Houses

#2

Re: Bird Houses

Ronster

I've down that sort of thing and in Texas. For example, a copper covered cupola that I didn't want wasps in. First piece of advice is don't do it. That's a bunch of work to do, especially if it's a roadside invitation for the baseball bat treatment. Also, that hot, windy, and frigid environment is torture for wood, glues, paints, and finishes. Second advice is make it well ventilated. Since you have copper scraps, you can mount them inside over your vent holes, after drilling wasp-excluding perforations in them. Another option is high end screening. I've used well chosen heavy gauge screening for this purpose. It is even available in stainless in you want. mscdirect.com is my source.

Re: Bird Houses

#3

Re: Bird Houses

Dave Bair

I've used regular black nylon screen material applied to the inside of the opening. The hole appears to be unscreened unless you inspect it closely.

Re: Bird Houses

#4

Ellis Walentine

Couple thoughts for you

Ellis Walentine

First, yes you need ventilation, and you can use window screen to keep bugs and varmints out. Don't forget to provide air intakes on the bottom of this house and exhause ports on the top side. The copper roof is up to you, but you might consider providing an airspace or an insulation layer between the roof and the living space inside the house, as the copper will be a serious radiator of solar exposure.

Also, I would reconsider using treated wood, which is full of toxic chemicals. I can't imagine that it would be safe for baby birds.

Ellis Walentine, Host

Re: Bird Houses

#5

Re: Bird Houses

Barry Irby

This a pseudo Bird house Right? No birds or bugs are to live in it?

I would be careful picking the treated lumber for this. Locally, at least, Treated = warps as it drys. If I felt it important to use treated wood I would find some that is dry, pick straight grained pieces for the staves, Lay them out flat on some tape, glue the joints and roll them up, clamp them with band clamps. Use water proof glue such as Titebond III. I made a bunch of real bird houses with staves and ran into a problem when the cylinder shrank and the top and bottom did not. That would be a good location for the screening. Mine burst. As for the holes, I would Drill them about half way through the wood and paint them black. Almost anything would be better than treated wood. Especially in a sun baked climate.

Re: Bird Houses

#6

No birds no bugs

Lee Schierer McKean, PA

If you are not wanting inhabitants, then don't put in any holes or even vents. It won't matter what temp it gets inside. Holes would only invite bugs. Once teh wood is dry the humidity inside will remain pretty stable. I would build it and let it set in the sun for a few days to a week to dry out before closing it up with teh roof. If you want the "entrance Hole" to look real drill it halfway through the wood and paint the hole black.

With the price of copper scrap where it is you might want to think twice about the copper roof. You might wake up some morning and the roof or entire house will be missing.

Lee

Re: Bird Houses

#7

Re: Bird Houses

Jack Prescott

Many bird houses are built with attracting a specific bird species in mind. Do a Google search for a specific bird and you will get more info than you ever wanted. For example, The National Blue Bird Society has a web site with a store house of info. I have installed 24 houses on a golf course and activity is prolific.

Don't use treated lumber. Western red cedar or cypress makes good bird houses. Ventilation is a must, etc., etc. See the above web site and it will give you a lot of do's and don't's and a lot of ideas from experts.

Re: Bird Houses

#8

Re: Bird Houses

Tom

I would just drill your entry hole half an inch deep, and then paint it black. It might not look all that realistic, but neither will the alternatives. This approach at least completely solves the problems that a more reaslistic approach could create. I used to store my boat near the water, and this particular spot had some martin houses with real martins. They were constantly trying to build nests in my boat. When I eventually put it back on the water, I discovered the beams were full of generations of birds that had built houses in the aluminum tubes, then got grilled alive when the temps increased. Horrible.