Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Portable table saw advice

Posts

Portable table saw advice

#1

Portable table saw advice

Joe Grittani

Greetings -

I'm involved in the restoration of the only remaining brick Shaker Meeting House (1827) at White Water Shaker Village in southwest Ohio. Some of you might have seen articles in Popular Woodworking over the past 2 or 3 years about reproductions of some WW pieces they built. They've been great supporters of our efforts.

We have a tremendous amount of trim work and floor repair (1 and 1/8" random width poplar) to do and lost access to the small table saw we were using. It wouldn't have handled this flooring anyway. The two of us doing this work live an hour and 1/2 from the site, so we need a saw on site. We'll need to make some very long rip cuts on flooring and do a lot of trim work and feel that we should probably get one of the portable 10" saws. We need a good fence and decent miter gauge and enough power to not stall out. Down the road we need to cut 1 and 1/4" white oak for 1st floor repairs. The Poplar flooring is in the attic and on the second floor.

Since we're volunteers working for a not for profit organization, money is tight, so cost will be a major factor in our decision. I'd appreciate any reviews/information anyone could provide so that we can make a reasonable choice at, hopefully, a reasonable cost.

I'd be glad to provide photos or information to anyone interested in what we're doing, or you can Google Friends of White Water Shaker Village for site photos but not too much on the restoration effort.

Thanks in advance.

Joe Grittani

Re: Portable table saw advice

#2

JL

Re: Portable table saw advice

JL

Don't get a Ryobi.

Bosch is good, Dewalt is good, Hitachi is good, Makita is good, Ridgid is good. For a few more dollars, you can get a contractors saw as opposed to a jobsite saw.

If your $ is really tight, look for a used contractors saw (preferably with cast iron wings). They can be had for a couple of hundred $.

Re: Portable table saw advice

#3

Clint Searl

Re: Portable table saw advice

Clint Searl

Ridgid beats 'em all!

Re: Portable table saw advice

#4

Maybe talk to HD or Lowes

Dustmaker Mike

and see if they could donate one or cut you one heck of a deal on one. You never know it is worth the try.

Re: Portable table saw advice

#5

Re: Portable table saw advice

Tom

I bought another inca 10 inch for 200 on friday. They are built like a swiss watch, light, and come up cheap. There are lots of others sometimes for as little as 25 dollars.