Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Sanding Inspection Light

Posts

Sanding Inspection Light

#1

Sanding Inspection Light

Joe Burke

In the past I've considered building a fixture, for lack of a better word, to provide raking light over sanded and finished surfaces for inspection. I've been using a Makita flashlight that came as part of a package with my drill and impact driver, and that actually works pretty well. Hold it at a low angle and move it around as need be. Recharge the battery as needed.

However, I do a lot of this type work and a dedicated, broader source might be better. I've Googled, and I've searched the archives here, but I haven't seen what I'm after. There's a company called Carter that sells inspection lights but they're way too pricey for what they are ... in my opinion anyway.

Anyone have a plan? An example? Input?

I'd go with LED I believe, and I've looked at work lights and even 12V auto lights as possibilities.

Just looking for ideas.

Re: Sanding Inspection Light

#2

Re: Sanding Inspection Light

Jerry Gibbs

Halogen work lights are cheap, bright and hot.

Re: Sanding Inspection Light

#3

JL

Re: Sanding Inspection Light

JL

Whats wrong with a desk light? Get a tube type or get a bulb type. They are inexpensive and work reasonably well. They also are adjustable and can hold positions.

I've got a bulb type that has served it's purpose quite well. I can set it to any angle.

Re: Sanding Inspection Light

#4

Re: Sanding Inspection Light

Keith Newton

Im withJL. I just toss the clamp on the base, and drill a few 1/2" holes into my work table, where I can quickly stick the bottom into.

Re: Sanding Inspection Light

#5

Here is an LED

Merle

light bar that you could probably mount on a camera tripod. I haven't dealt with the company and there are probably many others, but this is what I found with a quick Google search. HTH

http://www.superbrightleds.com/moreinfo/aluminum-light-bars/cll-x7-series-led-cabinet-linear-light-fixture/82/

Re: Sanding Inspection Light

#6

Re: Sanding Inspection Light

Dick Coers

I've picked up two floor lamps from neighbors who set them out for garbage days. They are the type that have 3 can lights mounted to the vertical post. You can't change the height easily, but easy to swivel all 3 lights towards the work, and easy to move around. I'd check Salvation Army or Goodwill for them.

Re: Sanding Inspection Light

#7

Re: Sanding Inspection Light

John Lucas

Joe as a photographer I can tell you the best lamp will be the smallest light source. Large light sources don't cast shadows as hard and make it rougher to see sanding scratches. Use either really small halogen light bulbs or incandescent lights with bare bulbs, no frosting. These produce the hardest shadows. If you can't get a really small light source just take a larger light and move it further away. This has the same effect if the light is bright enough. You do need it at a low raking angle.

for viewing finishing I think it's almost the other way around. A very large soft light, like a soft box will make a reflection if placed at the right angle and you can easily see how the spray is going down or if your wiping on a finish you can see every stroke.

Re: Sanding Inspection Light

#8

Re: Sanding Inspection Light

Gary Smyth

This may work for you. Battery operated, approx 9" long, 2" wide and 1 1/4" deep. Has a hanging hook and magnets on the back. Not heavy duty. About as portable for the output as you can get. Found the pictured in a sale bin at Tractor Supply. $10! They had only one but I'd have bought all they had if I had the chance. I use mine for a flashlight, for getting light inside cabinet spaces between dust panels, searching the lumber bin, and even checking the car and lawn engines. What I like best besides the light output is that it doesn't get hot. No burning my arm when working in tight spaces or moving it to a better spot. I haven't used it for your application but I bet it does the job. I'll bet ebay has these or something like it if TS has discontinued theirs.

Re: Sanding Inspection Light

#9

Is a special light necesssary?

Bill Tindall, E.TN.

I can not imagine anyone more picky than I about sanding and seeing where more is needed has never been difficult in typical light. Grain tear of any kind shows up in any light as dull places where the torn grain catches sawdust. Machine marks not removed show up as shiny spots. What's left to see?

Re: Sanding Inspection Light

#10

Re: Sanding Inspection Light

Thomas Skaggs, Foothills of Mount Level

So I have the standard halogen work lights on a tripod stand. The halogens are very bright and actually make it hard for me to see scratches. So I just pop the light heads off the tripod and, with the tripod riser up, I bungee a 2 tube cheap flourescent shop light to the riser. Very low tech and cheap...but hey, it works.

T.

Re: Sanding Inspection Light

#12

Rick L

Re: Spot light bulbs

Rick L

are what you want. I've used the Carter lights on stroke sanders and they are headlights on a transformer. The headlights ran cooler and when I used them LEDs weren't invented. The point you seem to be missing is you want a spotlight not a floodlight. You were close with the flashlight idea. We just did a quick version by putting spotlight bulbs in several clip lamp fixtures and it worked fine. Bulbs were 100 watts and $10 each. Clamp on fixtures were $10 each. Make a plywood box and mount four ceramic light sockets. How much simpler can it get??????