Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Re: JDS MULTI ROUTER - WANTED

Posts

Re: JDS MULTI ROUTER - WANTED

#1

Re: JDS MULTI ROUTER - WANTED

Lucio Carrozzo

Hi all

If you have a JDS Multi Router that you no longer use and wish to sell, please make contact as I am looking for one rather urgent. I will gladly pay for the shipping costs from your home for a well priced unit.

If someone has plans/templates for a good DIY one that I can make, please let me know. I saw that there was a good one from Dan Barber sometime back but unfortunately I can not open the pics for some reason or get hold of Dan as it seems he is no longer a member of this site.

Look forward to hearing from members.

Regards

Lucio Carrozzo

Re: Re: JDS MULTI ROUTER - WANTED

#2

Re: JDS MULTI ROUTER - WANTED

Paul Cates - Henderson, KY

I have the .pdf and .jpg files of Dan's Mortise-Flex from his website. Just let me know if you'd like me to email them to you.

Re: Re: JDS MULTI ROUTER - WANTED

#3

Re: JDS MULTI ROUTER - WANTED

Lucio Carrozzo

Hi Paul

Thank you very much for getting back to me. Please can you email me the details at; lucio@iafrica.com.

Many thanks

Lucio

Re: Re: JDS MULTI ROUTER - WANTED

#4

Re: JDS MULTI ROUTER - WANTED

Ralph Lipeles

Paul,

I would appreciate it if you could also send me a set. rlipeles@sbcglobal.net.

Thank you,

Ralph Lipeles

Re: Re: JDS MULTI ROUTER - WANTED

#6

Re: JDS MULTI ROUTER - WANTED

Lucio Carrozzo

Thank you Paul.

Re: Re: JDS MULTI ROUTER - WANTED

#7

Here's an all wood version.  *LINK*


pantarouter

Re: Re: JDS MULTI ROUTER - WANTED

#8

Re: Here's an all wood version.

Lucio Carrozzo

No detail on the all wood version

Re: Re: JDS MULTI ROUTER - WANTED

#9

Its a Woodcentral article... *LINK*

John in NM

The download files are zipped, perhaps that is some of the problem opening them.

If you build one, make the stylus heavy, like 1/2" steel rod. The original Multi-router's weak point is the light stylus that a heavy handed operator can bend enough to negate the accuracy of the machine. I worked in a shop with a Multi-router, and also a heavy handed employee. He also tended to burn up router motors by taking a full cut regardless of what kind of wood or cut he was making. Other than that they are great machines.


http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=powertools&file=articles_110.shtml

Re: Re: JDS MULTI ROUTER - WANTED

#10

Looks like lots of detail...

John in NM

You just have to cough up $18 for the plans :D :D :D

Re: Re: JDS MULTI ROUTER - WANTED

#11

Re: Looks like lots of detail...

Lucio Carrozzo

No problem John, will gladly pay, just never saw the link.

Re: Re: JDS MULTI ROUTER - WANTED

#12

Just kidding you

John in NM

One thing to note though, that all wood design is a pantagraph, it appears to reduce the pattern by a fixed ratio (I've not read the site closely). In some respects this may be better for your purposes than a Multi-router, but it also means use could entail a little more head scratching.

Re: Re: JDS MULTI ROUTER - WANTED

#13

strictly a slot mortiser also *LINK*

Dick Coers

He also sells plans for a slot mortiser.


slot mortiser

Re: Re: JDS MULTI ROUTER - WANTED

#14

thanks John

Lucio Carrozzo

thanks John appreciate the reply. I have a very sturdy vertical photograph machine that we used to use in our toolroom to engrave on steel, and am toying with the idea of converting it for my woodwork shop. Or perhaps I could leave it as is and adapt a horizontal add on table??? will keep you updated.

Re: Re: JDS MULTI ROUTER - WANTED

#15

Re: JDS MULTI ROUTER - WANTED

Larry

I would like one also, larryedinger@att.net

Thanks

Re: Re: JDS MULTI ROUTER - WANTED

#16

What Applications Do You Have In Mind? *LINK*

charlie belden

If it's mostly mortise and tenon joinery - and loose tenons will work for you - look into Festool's DOMINO. Half the price of a used JDS MultiRouter, requires no layout lines, much quicker and easier set up and cuts mortises as quick as using a biscuit joiner - push in - DONE. And the beauty of it is you take it to the work, not the work to the machine - and it's a hell of a lot lighter. Also has a built in dust port which, when used with a shop vac, means no dust or chips to clean up - so you can work On Site.

Just by looking at the DOMINO, it's easy, since it looks much like a biscuit cutter / biscuit joiner, to dismiss it as a very expensive biscuit cutter / biscuit joiner. IT IS NOT. It IS, in fact, a revolutionary power tool that enables a novice woodworking to make and use loose tenon mortise and tenon joinery in their work - without having to climb a steep learning curve.

Before you buy a used Multi Router, check out the DOMINO.


Lots about the DOMINO

Re: Re: JDS MULTI ROUTER - WANTED

#17

Re: Here's an all wood version.

Larry

Check out this http://www.youtube.com/watch?v=DIcUZayBSAs&feature=youtu.be He has more video, if you ask he will send you drawings. Not hard to build.

Re: Re: JDS MULTI ROUTER - WANTED

#18

Re: What Applications Do You Have In Mind?

Lucio Carrozzo

my next biggish project I will be making 60 or so folding deck chairs which requires a lot of mortise and tenon joint on wood under 50mm wide (+/- 1.3/4 inch) with most widths been of a repetitive size. your suggestion is a very good one however the price of that in my country of 2100usd is crazy if not absurd. when one considers that I can buy a 20inch good quality band saw its put the festool totally out the park. great machine make no mistake, and as you say would suit the need very well had their pricing been more realistic. however you have drawn my attention to it and I will be looking out for a used one that come up. rgds Lucio

Re: Re: JDS MULTI ROUTER - WANTED

#19

Re: What Applications Do You Have In Mind?

charlie belden

Here in the United States, the DOMINO, with accessories & loose tenons in various sizes, is around $1,100 usd.

The Multi Router is about $2,700usd new - and that's with only basic templates, $2,200 - $2,400 used, depending on the templates included.

If the DOMINO in your country is $2,100 USD - about twice what it is in the U.S., I'd assume that the $2,700usd Multi Router here would be pushing $5K usd in your country, maybe $3K used. Must be a hell of an import tax and/or value added tax to double the price of the Domino,

Re: Re: JDS MULTI ROUTER - WANTED

#20

Re: What Applications Do You Have In Mind?

Lucio Carrozzo

I think they sting the hell out of us on import taxes, to give you and idea the 201 dodge ram 1500 costs 79000usd, total madness. duties/taxes are put in place to protect the local industry but the joke is we dont produce the didge of the festool here so why the heavy taxes,,, Ill leave you to guess ;)