Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Anyone know of the Monarch X-24B Table Saw?

Posts

Anyone know of the Monarch X-24B Table Saw?

#1

Anyone know of the Monarch X-24B Table Saw?

Stephen Kirk

With my grandfather's passing, it's time to figure out what to do with all the stuff he accumulated. The main tool he had if what I believe to be a Monarch X-24B table saw. None of us can keep the saw (I have my own cabinet saw already) and at a half ton it's not an easy machine to move around.

I couldn't find much on this besides its original brochure, and I'm trying to determine its worth - if there is any. I know it came with a 5 horse motor which I believe was changed from its original 3 phase to 220 (don't ask me how). It's generally intact, not much rust. I used to to use it myself when I worked with him.

Re: Anyone know of the Monarch X-24B Table Saw?

#2

You might ask over at Old Woodworking Machines

Bill Houghton, Sebastopol, CA

Link below. These folks, collectively, know about as much as can be known about older machines. They don't discuss Asian-made machinery, but the weight you describe makes it unlikely to be Asian-made.

Note that, the first time you post, you can't put up photos; this is a spam filter. You can post your question, though, and go back later and add photos in a reply or as an edit.