Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Performax fine adjustment upgrade

Posts

Performax fine adjustment upgrade

#1

Performax fine adjustment upgrade

HeatherinAK

Hello, I picked up a performax 16-32 for $75 now knowing that they were worth much more. It is an older model without the fine adjustment bracket/knob and it has been a challenge getting the drum completely parallel with the belt. Has anyone added this bracket to an older model? I can't tell on the manual if it would fit on mine. I included a photo so maybe if someone has the newer version they could tell me if the frame assembly is the same. I am going to upgrade to the 4" dust port hood and thought I would order the bracket at the same time if it would fit.

Thanks,

Heather

Re: Performax fine adjustment upgrade

#2

Re: Performax fine adjustment upgrade  *LINK*

Bill Houghton, Sebastopol, CA

Your photo didn't come through.

I have no knowledge of these sanders - my fanciest sander is a belt sander - but I found one link, below, on aligning the drum that you might find useful, but I don't know enough to know how accurate it is.

It looks like JET may have purchased Performax at some point? If so, you could try contacting them: http://www.jettools.com/us/en/service-and-support/customer-support/


http://www.joewoodworker.com/performax.htm

Re: Performax fine adjustment upgrade

#3

Re: Performax fine adjustment upgrade 

HeatherAinAK


Here is the photo. You can see the difference in the old model and the 1st one in the link Bill sent. I am trying to see if I can add the bracket and knob in the instructions.

Thanks,

Heather

Re: Performax fine adjustment upgrade

#4

Re: Performax fine adjustment upgrade

Nelson Brooks

I have the older Perormax and its easy for me to adjust without the fine adjustment. Ihave two metal bars 1/2 thick , I remove the sanding belt lay the bars on table, loosen the 4 bolts and lower the head until it rest on the bars. Tighten bolts and you are good to go. Works for me.