Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Weathering cedar instantly - my experience

Posts

Weathering cedar instantly - my experience

#1

Weathering cedar instantly - my experience

Tim Greif - West of Chicago

I've read about taking cedar boards and making them look weathered using a vinegar and steel wool solution, so I figured I'd give it a try. I wanted to make of couple of craft style wall displays for some artsy-fartsy stuff and have it look like it was crafted from weathered wood.

I put a small chunk of fine steel wool (000) in a cup of white vinegar and let it steep for about four days. I diluted the "tea" about 3:1 with water. I tried a few different dilutions to see what the results were. Stronger solutions (less water) produced darker results that I didn't like. Perhaps if you only let the "tea" steep for a day, you may not need to dilute it as much. My final solution was about 1/4-cup tea diluted to one cup of solution. The pictures below show the results. I even put the board on the neighbor's 15 year old fence for comparison. You could easily use this on replacement fence pickets or deck boards to blend it into the weathered wood.

Worked for me.


Re: Weathering cedar instantly - my experience

#2

Not for indoors

Gary Smyth

but should you want to weather it further to mimic the neighbors fence, experiment with applying yogurt. I've had mixed results on wood and stone. Some show no result and some bloom with moss or lichen (or something). I'm in Southwestern PA and this worked for me. It takes a while. I applied it in the summer and on flat surfaces it worked by late fall. It didn't really show up until the following spring. Just get any live culture yogurt. What you don't use you can eat and it's cheap, maybe a couple of bucks for a six pack. Slather or paint it on or flick it on with a brush. Spritz your target with a very fine spray once a day, keep it in the shade for a week or so. It will grow green stuff in crevices. I finished stone walls with a yogurt spray to hasten the look of age. Try it to judge the effect on your project. It works best for me on sandstone and rough texture stone. Forget smooth and any stone that gets wear. Best in moist, shade. It's nearly impossible to get rid of once established, but if you like the look give it a try. By the way I don't know if what grows is good or bad for you but it looks like the stuff that grows by streams and people climb all over those rocks without apparent consequences. Just say'in.

Re: Weathering cedar instantly - my experience

#3

I never would have thought of that...

John in NM

That looks just like all the lichen growing on rocks around here.... I may have to give that a try :D

Re: Weathering cedar instantly - my experience

#4

Works on maple too...

John in NM


Color isn't quite as good as using nitric acid in place of vinegar, but it's sure easier to find vinegar. Same solution will turn walnut dark grey to black.

For an even coloration, I've found wiping on to be a bit of a problem. I may get a bucket and start dunking parts.

Re: Weathering cedar instantly - my experience

#5

Re: Weathering cedar instantly - my experience

Jim Hoeller

I've used a fairly strong solution to "ebonize" walnut.

Re: Weathering cedar instantly - my experience

#6

Re: Works on maple too...

R Payne

The age of the solution can have an effect on the color you get. I recently put some on maple and got a grey instead of the typical color I usually get. The solution I was using was rather old. I'm probably going to have to redo the piece with fresh.

Re: Weathering cedar instantly - my experience

#7

Another step...

John in NM

Try dunking it in a weak base first, that should change the grey to brown. I used lye on that stock, ammonia might work too, but I've never tried it.

I can't remember now if I followed the lye with peroxide or not. That gives a better brown color, but I recall the impression that the effect was temporary, so I didn't do it on a few. I can't remember now if the lye alone catches up to the lye+peroxide color, or if the lye+peroxide slowly reverts to just the lye color. I should do another sample and compare it to the others I did last year, that would answer the question.

Re: Weathering cedar instantly - my experience

#8

Re: Another step...

R Payne

This is the first I've heard of the lye. Thanks.

ron