Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Repairing an Aquarium question

Posts

Repairing an Aquarium question

#1

Repairing an Aquarium question

Barry Irby

My son has several aquariums and one of them has a broken top brace. this is the black plastic frame that surrounds the top and has a cross tie in the center. The tie is broken where it joins the side rail. This is about a 75 gallon aquarium and the top wants to spread apart. right now he has a clamp on it. I would like to get my clamp back and stop walking into it.

How to repair the frame? I suggested a wooden reinforcement all the way across the tank and physically hooked over the front and rear. I bought some stainless machine screws to attach it with. I was also wondering about just gluing some plastic to the brace to reinforce it. Anybody got any idea what glue to use? This needs to be 100% because I don't want a 75 (or is it 90?) gallon flood.

Any suggestions? Can you buy the top ring separately?

Re: Repairing an Aquarium question

#2

Re: Repairing an Aquarium question

Kevin French

"Plastic Weld"

Re: Repairing an Aquarium question

#3

Re: Repairing an Aquarium question

John McGaw

I would think that a suitable stainless "L" bracket, bolted to the cross-brace via some drilled holes and simply wrapping around the top of the perimeter frame and cemented (don't want to drill any holes there!) would provide enough strength. Problem is that the bracket would have to be custom-made since it isn't exactly an off-the-shelf item at your local hardware store. Whatever solution you come up with you'll need to take into account whatever hoods and lights the tank has.

Re: Repairing an Aquarium question

#4

Re: Repairing an Aquarium question

Lee Schierer McKean, PA

Years ago, a junk yard near where I lived had aquariums. The owner made his own. He used ordinary silicone sealant to seal the glass corners. He had tanks that were over 100 gallons. In fact one night a fire started in his office. It apparently burned until the glass on one tank broke from the heat and flooded the room putting the fire out. I made a terrarium using plate glass and the silicone sealant method and it is still working. The silicone even worked for the hinged lid.

Get a piece of glass cut to the size needed to span the top of the tank and maybe 4-5" wide. Apply a bead of silicone across the top edge of the tank glass in the center. Place the new piece of glass on the silicone, press it down firmly and smooth out the silicone with your finger inside and out. Let it set for 24-48 hours for full cure and then take your clamp back to your shop.

Lee

Re: Repairing an Aquarium question

#5

Re: Repairing an Aquarium question

Bill Houghton, Sebastopol, CA

...and sand the edges of the glass before installing, or have the glass shop smooth them.

Side question: Barry, do you stay up late at night working on stuff that inspires these questions? Or are you just involved in a lot of interesting stuff. You are the hands-down champion of off topic questions; and, often, questions from which I learn something I never realized would be nice to know.

Re: Repairing an Aquarium question

#6

Re: Repairing an Aquarium question

Barry Irby

Bill, I don't stay up late, but I do a lot of varied things. I also get dragged into the interests of family members and friends. On any given day I am refinishing a table my Grandmother had built many years ago, modifying a reel push mower to cut grass at 1/4" high, making jigs and fixtures to allow me to bore doors and install locks, figuring out why my car won't start, leveling the floor in the house I just bought at a tax sale, doing a home inspection, taking my son to the doctor, cooking supper, helping my son install a pre-hung door, closing one credit card and acquiring a new one because there were hundreds of dollars in erroneous charges, selling some the books and forms i wrote for the inspection business, Checking with my banker about expanding my line of credit, and the day ain't over yet.

Re: Repairing an Aquarium question

#7

You sure have way more energy than I do!

Bill Houghton, Sebastopol, CA

I get tired just reading your post! Good man, Barry...and a busy one. I appreciate, as I've read your posts, how much support your offer your sons; nice to see.

Re: Repairing an Aquarium question

#8

Re: Repairing an Aquarium question

Joseph Prendergast

Barry, Back in the early 70"s, I worked in a tropical fish importer business, and we had more tanks than I could ever remember. We always used Dow Silicone for every thing on all glass tanks as it was nontoxic to fish and plants and held really well.