Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Curtis Buchanan to demo spindle turning

Posts

Curtis Buchanan to demo spindle turning

#1

Curtis Buchanan to demo spindle turning

Bill Tindall, E.TN.

May 14 meeting of Holston Valley Woodworkers , Boones Creek, TN Woodcraft Store (near Johnson City) 7PM.

Curtis has become widely known for his U-Tube video on making Windsor Chairs. His spindles are uncomparible.

Re: Curtis Buchanan to demo spindle turning

#2

I learned to use the skew from Curtiss

John Lucas

The only turning we did in his class was on a spring pole lathe to turn the tapered tenons for the legs. Using the spring pole lathe and move the tool as slow as is required by that lathe really taught me to feel the cut and understand riding the bevel. I had used the skew before that but always got catches and really didn't understand what I was doing with it. Gosh now that I think of it that was about 20 years ago because I made that chair for my son who is now 24.

Shortly after that John Jordan had George Hatfield over for a demo and I really learned to use the skew to turn beads after his demo.

Curtiss is a great guy. You will enjoy him. If you ever get to take a chair making class from him do it. It's one of the most fun things I've ever done. Well OK it was a lot of work and our butts hurt from sitting on those shaving horses but the fun and sense of accomplishment was what it was all about.