Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Design input, please

Posts

Design input, please

#1

Design input, please

Larry Wyatt(Cole's Dad)

I'm building a quilt ladder for my lovely bride for her quilting room for Mother's Day. As you see in the photo of a bit alignment test piece, it's made of red oak and has some stopped v grooves in the pattern on the dry erase board at the tops and bottoms of the 'uprights.' One plug is mahogany, which I'm finding splinters pretty readily as plug material. The other is quilted maple which was nice to work. Question...plugs/no plugs? And if plugs, mahogany, maple or other?

Thanks and warm regards!

Larry [uplimg]/webbbs/media/temp/a152af9bc852a982861d9304155b1032_1_oakplugtestweb.jpg[/uplimg]

Re: Design input, please

#2

Re: Design input, please

Larry Wyatt(Cole's Dad)

Picture didn't post and now I don't have the option to upload a file to this or a new message. Sorry 'bout that folks.

Re: Design input, please

#3

Here's the photo...

Larry Wyatt(Cole's Dad)

Here's the photo...


img

Re: Design input, please

#4

I'd go with the maple

Bill Houghton, Sebastopol, CA

Your drawing makes the lines and plugs look a little like spermatozoa, but the mockup looks better. I'm concerned that the plugs will overwhelm the pattern; you might try slightly smaller plugs and see how they look.

Incidentally, your photo posting problem has come about because you've changed your posting name away from the name under which you're registered. I've sent an e-mail to the e-mail you have listed in your profile name; if you've changed e-mails since you created that profile, or if you don't get the message, send up a flag with a reply here, and I'll post some information on how you can fix the problem.

Re: Design input, please

#5

Thanks Bill!


Re: Design input, please

#6

Re: Design input, please

art demers

How about the red oak that it's made of get a plug cutter and try that If not possible the mahagy is ok

Re: Design input, please

#7

Re: Design input, please

Jesse Cloud

If you like the black color of ebony, but not the workability or the price, there are lots of recipes out there for "ebonizing" other woods to look like ebony. The easiest is a couple of coats of india ink.

Red and green or brown would look like berries.

Re: Design input, please

#8

You could substitute

Merle

walnut for the mahogany. It would give you a dark color and I have never found it to be splintery.