Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Paint stripper

Posts

Paint stripper

#1

Paint stripper

Gary Smyth

The weather is good enough and now is the time to get to three tapered wood columns that have decades of repainting on them. The paint is all enamel and likely there is lead on some portion of them. I need to get these down to bare wood and find out if there is enough value to fill and refurbish to install in my home or set them out to let weather do its will out in the landscape. In my view the old caustic strippers were the best but no one around here sells that stuff any longer. I'm in the range of no more than $40 dollars a gallon- if it does the job, and I'll need two. I don't want to make this my life's work. The columns will be repainted no matter where they eventually go. I'll just take better care if they will come inside. The web provides mostly ads and some reviews but what I've read aren't worth the time I took to read them. Real world. Opinions with brand names are what I'm looking for.

Re: Paint stripper

#2

Re: Paint stripper

Bill Tindall, E.TN.

The most aggressive stripper will contain the highest concentration of methylene chloride. It dissolves or at least softens anything.

Re: Paint stripper

#3

Re: Paint stripper

Don Stephan

There's likely a pretty clear inverse correlation between the cost of the stripper and the time and trouble to get the paint off back to bare wood.

Re: Paint stripper

#4

How about a heat gun?


Re: Paint stripper

#5

I've used heat...

John in NM

Works great, leaves you with big chunks of paint rather than dust. Downside is its probably a bit more work than a chemical stripper, and generally must be followed by sanding - so get a dust mask if the chance of lead worries you.

I haven't used a chem stripper in many years, the methylene chloride varieties work really well, if you can find them. Definitely for use in a well ventilated area though, I don't often worry much about fumes, and I remember a bad experience with this stuff. No idea if the strong stuff is readily available where you live, probably not if you are in CA. I saw some recently (at least a brand name remembered as the strong stuff) at my local Benjamin Moore store - I would look for a pro-paint store rather than a home center if you want the old reliable nasty chemicals.

I've also had pretty good luck with the orange citric stuff from HD. Won't get everything, but it's surprisingly good for a "safe" product. Years of oil paint shouldn't be any problem for it.

Re: Paint stripper

#6

Would you need a respirator

Merle

with heat and lead?

Re: Paint stripper

#7

I'm sensitive to fumes. Respirator

Gary Smyth

for vapors is essential for me. So are long gloves. At least it's cool in the AM still. A heat gun is not worth the time until I find out if the column tapers are worth saving. Did a test last night and have pretty close to 3/16" buildup on some sections. I'm thinking chemical and wrapping the column section with clear kitchen wrap to limit evaporation. It will be messy but I can let it work over night. Costco for the wrap and a paint store is on the travel list this weekend.

Re: Paint stripper

#8

I wouldn't think so...

John in NM

A heat gun won't get the paint hot enough to produce lead fumes. Biggest danger would be inhaling dust from sanding the paint and having that dust on one's hands and clothing - without washing immediately afterwards odds are good that it would get ingested somehow or another.