Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT Painting a BBQ

Posts

OT Painting a BBQ

#1

OT Painting a BBQ

Dustmaker Mike

Howdy all well today's OT is about my BBQ grill. I have an older Vermont Casting stainless steel grill that needs a little TLC. The out sides are in great shape but the inside cast metal needs some derusting and painting. So my question is I found a paint for cars that will work on the engines. Can I use this on the inside of the grill. My mind says after it cures it should be fine but I wanted to go to the wisdom of WC for another view. Thanks Mike

Re: OT Painting a BBQ

#2

Jason Roehl in Lafayette, IN

I wouldn't.

Jason Roehl in Lafayette, IN

Anything you apply inside the grill is going to fail. How and when it fails is the question. I sure wouldn't want it flaking off into my food.

If it's stainless, I'd pressure wash/scrub the grill, then use some vinegar and a (steel or stainless) wire brush to deal with the rust, maybe put the vinegar in a spray bottle. Just watch how quick it's working and adapt--spritz and let it set or spritz and scrub then let it set for a while, whatever. Then I'd rub the inside down with olive oil (I'm not a fan of other veggie oils) or just leave it.

Of course, this reminds me that my cast iron Chargriller with the side fire box is in need of some attention...

Whew...wifey isn't looking over my shoulder...

Jason

Re: OT Painting a BBQ

#3

Re: OT Painting a BBQ

Steve Mackay

I HAVE painted the outside with engine paint but it didn't seem like a good idea on the inside. I put the wire brush on the drill and cleaned 'er up then gave it a liberal wipe down with cooking oil. "Cooked that on (I guess they'd say I "seasoned" it). When it gets "groady" by the end of the season, wipe it down and do it again.