Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

diamond stone

Posts

diamond stone

#1

diamond stone

art demers

I just purchased a diamond stone to hone carbide tips .Do I put oil or water or even spit on it to sharpen that tool?

Re: diamond stone

#2

Re: diamond stone

Bill Tindall, E.TN.

I have been using them for many years to sharpen chisels and plane blades. I think they work best with a bit of lubricant. I am using water miscible cutting fluid but I expect water and a bit of soap/detergent would do as well.

Re: diamond stone

#3

Re: diamond stone

Keith Newton

I've been using mine dry for years, with no problems. I'll slap them across my pant leg after heavy use, and may scrub them with lacquer thinner, if they look like they need better cleaning. Of course, if there is any kind of pitch build-up, you should use a lubricant, to keep that from clogging, and never use them for soft metals.

Re: diamond stone

#4

Re: diamond stone

art demers

Thanks a lot I can always count on you guy's.